User manual TOSHIBA RAV-1000CHJE SERVICE MANUAL

[. . . ] 4 PRECAUTIONS FOR SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 PARTS NAME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 PARTS NAME OF REMOTE CONTROLLER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 CORRECT USAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] is displayed, ON time of the failed program flashes. When flashing ERROR SuMoTuWeTh Fr Sa PROGRAM1 PROGRAM2 PROGRAM3 ERROR 7. How to copy the program operation time When setting the program operation, already set program can be copied and set to the other day of the week. <Example: To copy the operation contents of Monday to Tuesday> 1. Push DAY button and put the operation reserve SuMoTuWeTh Fr Sa indication on the day of the week of which the PROGRAM1 program operation is already set. PROGRAM2 (Monday in the example) PROGRAM3 3. Present day of the week indication and Operation reserve indication flash. Push DAY button and put the present day of the HH MM CLEAR CHECK week indication on the day of the week to be copied. (Tuesday in the example) (For continuous copying, push SET button, and then push DAY button. ) 5. The operation reserve indication goes on under the copied day of the week. ERROR WEEKLY TIMER 2. 5. Push SET button to flash the time to be corrected. 3) Push PROGRAM button of the program weekly timer. The flashing colon " : " changes to the clock display in the normal status. In this case, the program is memorized by the backup function. Therefore, it is unnecessary to set the program again. SuMoTuWeTh Fr Sa PROGRAM1 PROGRAM2 PROGRAM3 ERROR WEEKLY TIMER SuMoTuWeTh Fr Sa PROGRAM1 PROGRAM2 PROGRAM3 ERROR PROGRAM DAY HH MM SET CLEAR CANCEL SuMoTuWeTh Fr Sa PROGRAM1 CHECK WEEKLY TIMER 9 DAY HH MM SET CLEAR CANCEL PROGRAM2 PROGRAM3 ERROR PROGRAM CHECK 10 11 2. Operation of program weekly timer and air conditioner 10. How to clear the program operation · Clear of the day of the week 1) Push PROGRAM button. 2) Push DAY button and select the reserve mark to be cancelled. The operation reserve indication disappears. · Clear of a part of the program 1) Push PROGRAM button. 2) Push DAY button and select the reserve mark on a to be cancelled. 4) Push SET button again to flash ON or OFF time of the program to be cancelled. [. . . ] 1. 6 times higher than that of refrigerant R22. Accompanied with the new refrigerant, refrigerating oil has also been changed. Therefore, during installation work, be sure that water, dust, former refrigerant, or refrigerating oil does not enter the refrigerating cycle. To prevent charging an incorrect refrigerant and refrigerating oil, the sizes of connecting sections of charging port of the main unit and installation tools are charged from those for the conventional refrigerant. [. . . ]