User manual TOSHIBA RAV-260AH8-P SERVICE MANUAL

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual TOSHIBA RAV-260AH8-P. We hope that this TOSHIBA RAV-260AH8-P user guide will be useful to you.

Lastmanuals help download the user guide TOSHIBA RAV-260AH8-P.

Download

Manual abstract: user guide TOSHIBA RAV-260AH8-PSERVICE MANUAL

Detailed instructions for use are in the User's Guide.

 [. . . ] SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Indoor Unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CONSTRUCTION VIEWS (EXTERNAL VIEWS). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Indoor Unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  [. . . ] YES (MANUAL)

NO

NO Is refrigerant line 1 line?YES (To AUTO address mode) YES

Do you change setting after automatic setting at the first time?YES Connect one remote controller with one indoor unit (1 : 1) tentatively with communication cable. 

Turn on power of outdoor unit. 

Turn on power of outdoor unit. 

Turn on power of outdoor unit. 

Set to all indoor units one by one. 

(

After completion of address setup,  change is to arbitral address/group manually. 

)(

Setup of automatic address finishes within 4 to 5 minutes. 

)

END

· When the following addresses are not stored in the neutral memory (IC503) on the indoor P board,  a test . C. (Unfixed data at shipment from factory)
CODE No. Line address Indoor unit address Group address 12 13 Data at shipment 0099 0099 Setup data range 0001 (No. value of indoor units in the identical refrigerant line 0000 : Individual (Indoor units which are not controlled in a group) 0001 : Header unit (1 indoor unit in group control) 0002 : Follower unit (Indoor units other than master unit in group control)

14

0099

­ 66 ­

10-2. Address Setup & Group Control
<Terminology>
Indoor unit No. Group address : N - n = Outdoor unit line address N (Max. 64) : 0 = Single (Not group control) 1 = Header unit in group control 2 = Follower unit in group control

Header unit (= 1) : The representative of multiple indoor units in group operation sends/receives signals to/from the remote controllers and follower indoor units. ( It has no relation with an indoor unit which communicates serially with the outdoor units. ) The operation mode and setup temperature range are displayed on the remote controller LCD. (Except air direction adjustment of louver) Follower unit (= 2) : Indoor units other than header unit in group operation Basically,  follower units do not send/receive signals to/from the remote controllers. (Follow to the procedure during operation)

1

Push and buttons simultaneously for 4 seconds or more. · Fans and louvers of all the indoor units in the group control operate. Every pushing button,  the unit numbers in the group control are successively displayed. displayed at the first time indicates the master unit address. · Fan and louver of the selected indoor unit only operate. All the indoor units in the group control stop. 
TEST
UNIT LOUVER

VENT

TEST

TEMP. 

ON / OFF

TIMER SET

FAN

MODE

1
FILTER L RESET TEST

TIME

SAVE A

VENT

SET

CL

SWING/FIX

UNIT LOUVER T

2

3
<Operation procedure>

2 1 2 3 END

3

­ 70 ­

Concealed Duct High Static Pressure

Owner's Manual

Concealed Duct High Static Pressure

Owner's Manual

11. OWNER'S MANUAL
Original instruction

ADOPTION OF NEW REFRIGERANT
This Air Conditioner uses R410A an environmentally friendly refrigerant. 

Thank you for purchasing this Toshiba air conditioner. Please read carefully through these instructions that contain important information which complies with the "Machinery" Directive (Directive 2006/42/EC),  and ensure that you understand them. Some of the details provided in these instructions differ from the Installation Manual supplied with your product,  and the instructions provided here take precedence. After reading these instructions,  be sure to keep them in a safe place together with the Owner's Manual and Installation Manual supplied with your product. 

Generic Denomination: Air Conditioner Definition of Qualified Installer or Qualified Service Person
The air conditioner must be installed,  maintained,  repaired and removed by a qualified installer or qualified service person. When any of these jobs is to be done,  ask a qualified installer or qualified service person to do them for you.  [. . . ] 2) Cut the bundling band (2 positions) that fix the protective tube (white) on the relay connector of the fan motor. 3) Remove the fan motor lead wire assembly and the protective tube from lead wire of the fan motor. 4) Mount the fan motor lead wire assembly and the protective tube to the fan motor to be replaced,  arrange the tube so that it covers the relay connector and then fix it with bundling band (2 positions). 5) Put the fan motor to be replaced on the motor base.  [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE TOSHIBA RAV-260AH8-P

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual TOSHIBA RAV-260AH8-P will begin.