User manual TOSHIBA S35

[. . . ] User's Manual 30DVD/35DVD atellite DVD SATELLITE30DVD/35DVD SATELLITE Choose freedom. Copyright © 2000 by Toshiba Corporation. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, with respect to the use of the information contained herein. Toshiba Satellite 30DVD/35DVD Portable Personal Computer User's Manual First edition September 2000 Notice The information contained in this manual, including but not limited to any product specifications, is subject to change without notice. [. . . ] Insert the plug of the USB cable into the USB port on the computer. 2. Connect the plug on the other end of the USB cable with the USB device. On some devices step 2 is not necessary. For using USB conform peripheral devices the system (OS) and the peripheral device driver also have to follow that standard. Regarding USB peripheral devices released in the future, we cannot confirm their performance and therefore we cannot guarantee that all those peripheral devices will work properly with this equipment. Removal Unplug the USB cable that connects the computer to the USB device For detailed information on USB devices, please refer to the manual that came with your USB device. User's Manual Hardware 4-17 i. LINK (IEEE 1394) devices This product has an i. Link connector that allows you to install devices, which comply with the i. Link (IEEE 1394) standard. Installing/removing the cable Installing 1. Insert the plug of the cable into the i. Link connector on the computer. 2. Connect the plug on the other end of the cable with the i. LINK device. Please pay attention to the shape of the connector and attach it properly when you connect it. If you handle the connector with too much force, pins could be broken or bent. For using i. LINK conform peripheral devices the system (OS) and the peripheral device driver also has to follow that standard. We do not carry out performance checks for all i. LINK conform peripheral devices. Therefore we cannot guarantee that all i. LINK conform peripheral devices will work properly with this equipment. Please use a cable that complies with the standards (S100, S200, S400 conform). For detailed information, please contact the cable manufacturer. Do not use a cable that is longer than 2m. Depending on the peripheral device you install, there are cases where you cannot setup the standby mode or hibernation mode. When you connect an i. LINK device and use it through an application, please do not install/ remove i. LINK devices and do not disconnect the power cable or the AC adaptor, and do not operate the computer in a power saving mode where the power is turned off automatically. At this case we cannot guarantee for the data contents. Please have the AC adaptor connected when you capture or return pictures from a digital video camera. In case the system hangs up, optimise the disk and close all other applications. Optimising the disk: [Click Start], [Program], [Accessories], [System Tools], [Defragmenter] 4-18 Hardware User's Manual Removal 1. Click the Remove Hardware icon in the taskbar. [. . . ] Rivium Boulevard 41 2909 LK Capelle a/d IJssel Scribona Norge A/S; Toshiba PC Service Stålfjæra 20, P. O. Box 51, Kalbakken 0901 OSLO AC Serwis Sp. Partyzantów 71, 43-316 Bielsko-Biala Quinta Grande Assisténcia Técnica Informática Lda. Quinta Grande, 30 J; 2720-487 Alfragide Scop Computers SRL 162 Barbu Vacarescu St, Sector 2 71424 Bucharest HTC a. s. Dobrovicova 8; 81109 Bratislava Inea d. o. o. [. . . ]