User manual TOSHIBA SATELLITE 4080

[. . . ] These copyrighted materials may be copied for private use at home only. If, beyond the limitation above, you copy (including to transform data formats) or modify these materials, transfer them or distribute them via the Internet without approval of copyright owners, you may be subject to claims for compensation for damage and/or criminal penalties due to infringements of copyrights or personal rights. Please remember to observe the copyright laws when you use this product to copy the copyrighted works or perform other actions. Please note that you may infringe the owner's rights protected by the copyright laws if you use the screen mode switching functions (e. g. [. . . ] Data deleted (erased) from a CD-RW and DVD-RW/+RW/-RAM disc cannot be recovered. Check the content of the disc carefully before you delete it. If multiple drives that can write data to discs are connected, be careful not to delete data from the wrong drive. In writing to a DVD-R/+R/-RW/+RW disc, some disc space is required for file management, so you may not be able to write the full capacity of the disc. User's Manual 5-15 SATELLITE 4080 Since the disc is based on the DVD-R/-RW standard, it will be filled with dummy data if the written data is less than about 1 GB. Even if you write only a small amount of data, it might take time to fill in the dummy data. Two types of DVD-R/+R/-RW/+RW/-RAM discs are on the market: data and video. You can use video discs on a DVD recorder as well as on your computer's DVD-ROM drive. You cannot use data discs on a DVD recorder. DVD-RAM formatted by FAT32 cannot be read in Windows 2000 without DVD-RAM Driver Software. When multiple drives that can write data to discs are connected, be careful not to write to the wrong drive. Be sure to connect the universal AC adapter before you write or rewrite. Keep mobile phones and other wireless communication devices away from the computer. Always copy data from the hard disk drive to the CD. Do not use cut-and-paste as the original data will be lost if there is a write error. How to make a LabelflashTM DVD Simplified steps for making a LabelflashTM DVD: 1. Insert a LabelflashTM disc in DVD drive. Click Start -> All Programs -> DVD MovieFactory for TOSHIBA -> Ulead DVD MovieFactory for TOSHIBA Launcher to launch DVD MovieFactory. Click Print Disc Label -> Label Printing. Add and customize the look of your images and text. Click LabelflashTM setting and choose Draw Quality. The availability of LabelflashTM function depends on the model you purchased. User's Manual 5-17 SATELLITE 4080 Writing CDs/DVDs/HD DVDs on a HD DVD-R drive You can use the HD DVD-R drive to write data to either CD-R/RW or DVD-R/-RW/+R/+RW/-RAM or HD DVD-R discs. The following applications for writing are preinstalled: TOSHIBA Disc Creator/ Direct Disc Writer. Ulead DVD MovieFactory® for TOSHIBA, which is a product of Ulead Systems, Inc. Important message Before you write or rewrite to CD-R/RW or DVD-R/-RW/+R/+RW/-RAM or HD DVD-R media, read and follow all set-up and operating instructions in this section. [. . . ] 1) A technology that allows the inclusion of up to 100, 000 simple logic gates on a single chip. 2) An integrated circuit that uses large scale integration. M megabyte (MB): A unit of data storage equal to 1024 kilobytes. mode: A method of operation, for example, the boot mode, Sleep mode or the hibernation mode. modem: Derived from modulator/demodulator, a device that converts (modulates) digital data for transmission over telephone lines and then converts modulated data (demodulates) to digital format where received. [. . . ]