User manual TOSHIBA SATELLITE P10

[. . . ] Macrovision: This product incorporates copyright protection technology that is protected by method claims of certain U. S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. [. . . ] Slide the release lever (1) on the bottom of the computer in the direction of the arrow. 3 4 Slide the drive (2) out of the multipurpose bay. Insert the weight saver. Using your notebook Sony Notebook User Guide nN 63 Re-inserting the floppy disk drive To re-insert the floppy disk drive, proceed as follows: 1 2 3 4 Turn off the computer. If another device is in the multipurpose bay, remove the device. Insert the floppy disk drive into the multipurpose bay with the metallic part up. Continue pushing the drive into the bay until the release lever locks into place. Using the Net MD Bay unit (optional accessory) Net MD is the next generation in MiniDisc technology. It further expands the MiniDisc format by allowing direct PC-to-MD `drag and drop' transfers. Using your computer, you can transfer audio files, edit MiniDisc tracks, and more. The Net MD interface converts digital audio files into ATRAC or ATRAC3, so you can play MiniDiscs recorderd with Net MD on other MiniDisc units. To attach the Net MD MiniDisc, proceed as follows: 1 2 3 If another device is in the multipurpose bay, remove the device. Set up the tilt stands on the bottom of the computer. Slide the Net MD MiniDisc in the direction of the arrow until it clicks into place. Using your notebook Sony Notebook User Guide nN 64 To remove the Net MD MiniDisc, proceed as follows: 1 2 Slide the multipurpose bay release lever on the bottom of the computer in the direction of the arrow. Plug one end of the audio cable (3) into the headphone connector (4). Plug the power cord of the TV (5) into an AC outlet. Switch the input channel of the TV to external input. Set up the TV configuration system. See the manual supplied with your peripheral for more information on installation and use. If you insert a DVD in your DVD-ROM drive to watch a video on your TV, the <Fn>+<F8> key combination might not activate the function to toggle between your LCD and TV. Once the DVD is ejected, toggle between your LCD and your TV with the combination <Fn>+<F8>. Your image displays now on both LCD and TV. Re-insert your DVD to launch your DVD software. If the display resolution of your computer is more than 800 x 600 pixels, a part of the image cannot be displayed on your TV. The hidden area on your TV can be seen by moving the cursor on your computer. If you want to display the full image, change the display resolution of your computer to 640 x 480 pixels. Connecting peripheral devices Sony Notebook User Guide nN 71 Connecting a projector You can connect a project (such as the Sony LCD projector) directly to your notebook. To connect a projector, proceed as follows: 1 2 3 4 Plug the RGB signal cable (1) into the monitor/VGA connector (2) identified by the symbol. [. . . ] PSTN (Public Switched Telephone Network) refers to the plain old telephone service, the national telecommunication networks implementing voice transmission by using analog signals. Short for Random Access Memory, the memory used to run programs and store data in current use. RAM is the fastest kind of memory to read from and write to. Information stored in RAM is lost when you turn off the computer. [. . . ]