User manual TOSHIBA SATELLITE PRO 4310

[. . . ] Hewlett-Packard assumes no responsibility for the use or reliability of its software on equipment that is not furnished by Hewlett-Packard. This document contains proprietary information that is protected by copyright. No part of this document may be photocopied, reproduced or translated to another language without the prior written consent of Hewlett-Packard Company. Harmony Road Fort Collins, CO 80528-9599 USA 2 Contents 1. [. . . ] This name will appear in the Application group box. Save As Button Allows you to save the current *Custom configuration as a named user-specific configuration. Delete Button Allows you to delete a custom configuration. 32 Chapter 1 TOSHIBA Visualize fx2+, fx4+, fx6+ Graphics Cards and Texture Module Installing the TOSHIBA Visualize fx+ Graphics Card Troubleshooting This section describes how to troubleshoot problems that may arise with your graphics subsystem. It also provides some tips on how to improve the graphics performance. Troubleshooting Video Problems Problem: At boot time, the screen is blank and there are no error messages. Solution Check that the computer and display are turned on. (The power light should be illuminated. ) Check the display's contrast and brightness settings. Make sure that all cables and power cords are plugged in. If possible, try another monitor and set of cables. Check the LCD screen of your Personal Workstation. If the LCD screen reports `Error No Video, ' check that the TOSHIBA VISUALIZE fx+ graphics card is correctly inserted into the AGP Pro and the PCI slots. The diagnostics tests include an in-depth check of the graphics ASICS, frame buffer and texture module (if present). CAUTION To run the diagnostics tools you must start Windows NT in VGA mode. Chapter 1 37 TOSHIBA Visualize fx2+, fx4+, fx6+ Graphics Cards and Texture Module Installing the TOSHIBA Visualize fx+ Graphics Card To run the diagnostics tool: 1. Shut down Windows NT and restart in VGA mode. You may receive a message saying that the current display settings are not valid. Click OK and then click the Cancel button in the Display Properties dialog box. Click on TOSHIBA VISUALIZE fx Diagnostics. Click Test All to test each of the card's modules. The results for each test are displayed on the right side of the window. Troubleshooting Performance Problems Problem: Graphics performance is below expectations. Solution Check the TOSHIBA web site for an updated driver version for your application. http://www. hp. com/go/ visualizesupport The driver may not be optimized for the application used. Open Display Properties, select the Options panel and select the appropriate application. [. . . ] Upon such a transfer, Customer agrees that his/her rights in the software are terminated and that he/she will either destroy his/her copies and adaptations or deliver them to the third party. Customer may not lease, sublicense the software or distribute copies or adaptations of the software to the public in physical media or by telecommunication without the prior written consent of Hewlett-Packard. Hewlett-Packard may terminate this software license for failure to comply with any of these terms provided Hewlett-Packard has requested Customer to cure 58 Appendix A Regulatory Information and Warranty TOSHIBA Hardware Warranty the failure and Customer has failed to do so within thirty (30) days of such notice. Customer agrees that the software does not include updates and upgrades which may be available from Hewlett-Packard under a separate support agreement. [. . . ]