User manual TOSHIBA SATELLITE PRO 6050

[. . . ] You can also find information on the following site: http://www. grundig-dect. com For your comfort and safety, we ask that you read the following paragraph carefully: Selio 2. Before you begin Make sure your package includes the items: Base unit, Handset, One battery compartment cover, Handset battery, Telephone line cord, Two rechargeable batteries, AC power supply. Selio Only use the supplied power adapter, connect it to the base socket according to the installation instructions provided in this booklet and the indications on the identification label affixed to it (voltage, current, electric network frequency). As a safety measure, you can use the power adaptors to cut off the 230V current in case of danger. They must be located near to the device, and must be easily accessible. Selio 2. 5. [. . . ] Select the entry to be changed using or . 2. 3. Using the or key, select "date/time". Press A screen displays the current date DD/MM format. Enter the new date and press the key . -7- -8- -9- - 10 - Dépliant LU 253106070A Selio EN_UK. fm Page 2 Lundi, 28. A screen then displays the current time. You will hear a confirmation tone. Selio 8. 1. 2. 1. 4. Selio Handset ringer melody Press Using the Using the , select " settings " using the or or or key, Press . This function allows you to assign a ring tone for incoming calls. Selio 4. The display shall show "WAITING" to indicate the waiting state. 8. 4. Changing the base station ringing volume 1. Press Using the , select " settings " using the or or key, Press . Press Using the , select " settings " using the or or key, Press . Disassociation handset This function allows you to remove the registration of a handset from your base station. You may need to do this if you have lost a handset or if you have already registered 4 handsets on the base station. Select "advanced set" using the or key, press . key, select "handset tone" Press key, select "key tones" Press 3. 2. 3. key, select "base tones" Press 3. 4. to select "ON" or "off" setting. 4. Using the or key, select "ring melody" Press Five tones are available : " melody 1 ", . . . , " melody 5". Select a tone then press the key 4. 7. 3. Press , select "clock / alarm " using the or key, Press . 5. . You will hear a confirmation tone. Using the or key, select "de-register". Enter the 4 digit base master PIN code (default 0000). [. . . ] Unless the customer has concluded with SAGEM a maintenance contract in respect of the equipment which specifically provides for repairs to be carried out at the customer's premises, the repairs will not be carried out on the equipment at the customer premises. The customer must however return the defective equipment at his/her own expense, to the address given by the dealer or Sagem Communications Helpdesk. In case a product needs to be sent in for a repair, it always has to be accompanied by a proof of purchase (which is not altered, written on or in any way be made illegible) showing that the product is still under warrantee. In case no proof of purchase is enclosed, the SAGEM repair center will use the production date as a reference of establishing the warrantee status of the product. 14. 3. [. . . ]