User manual TOSHIBA SATELLITE 440 FIELD REPLACEABLE UNIT DOCUMENTATION

[. . . ] Pressing the Enter key with the highlight on a selection that is not a submenu or auto selection will cause a list of all options for that item to be displayed. Pressing the Enter key again will select the highlighted choice. Entering the BIOS Setup Utility To enter the BIOS Setup Utility do the following: 1. Press the [F2] key once the Fujitsu logo appears on the screen. This will open the main menu of the BIOS Setup Utility with the current settings displayed. [. . . ] Serial/Parallel Port Configuration Submenu 12 Advanced Menu Table 5: Fields, Options and Defaults for the Port Configuration Submenu of the Advanced Menu Menu Field Serial Port: Options · Disabled · Enabled · Auto Default [Enabled] Description When [Enabled] is selected, the port is on. When [Disabled] is selected, the serial port is turned off. When [Auto] is selected, the Plug & Play feature configures the port. Note that for systems running Windows XP, this legacy port is not supported without additional device-specific drivers. Select the I/O address for the serial port. (Note that if there is a conflict between the port interrupts or addresses, asterisks will appear adjacent to the affected port names to alert you to the fact. In that case, make a different selection. ) Allows user to set the infrared port base I/O address when the serial port is Enabled. (Note that if there is a conflict between the port interrupts or addresses, asterisks will appear adjacent to the affected port names to alert you to the fact. In that case, make a different selection. ) When Disabled, the infrared port is off; when Enabled, the infrared port is on. When Auto is selected, the Plug & Play operating system configures the port. Select the mode for the infrared port: Infrared or Fast Infrared. CPU Features Submenu Menu Field SpeedStep® Technology: Options · Disabled · Enabled Default [Enabled] Description When Enabled is selected, CPU speed and battery use can be selected from On Battery and On AC. When Disabled is selected, SpeedStep Technology is disabled. When Maximum Performance is selected, CPU speed is maximized. When Battery Optimized is selected, CPU power requirements are optimized for battery operation. When Maximum Battery is selected, CPU speed is optimized for battery operation. When Automatic is selected, the CPU speed is determined by the power source used. When Maximum Performance is selected, CPU speed is maximized. When Battery Optimized is selected, CPU power requirements are optimized for battery operation. When Maximum Battery is selected, CPU speed is optimized for battery operation. When Automatic is selected, the CPU speed is determined by the power source used. On Battery: · · · · Maximum Performance Battery Optimized Maximum Battery Automatic [Battery Optimized] On AC: · · · · Maximum Performance Battery Optimized Maximum Battery Automatic [Maximum Performance] 18 Advanced Menu USB Features Submenu of the Advanced Menu The USB Features Submenu allows for the enabling or disabling of SCSI SubClass support, thus enabling support for USB mass storage devices that belong to the SCSI SubClass. Examples of such devices include USB memory keys and floppy drives. Main Advanced PhoenixBIOS Setup Utility Security Power Savings Exit Item Specific Help USB Features Legacy USB Support: SCSI SubClass Support: [Enabled] [Enabled] [Disabled] The feature is disabled. [. . . ] To change the order, highlight one source by using the [up] or [down] cursor keys and then press the [+] or [-] key to change the order number for that source. Pressing [d] removes from the list a device that is not installed. Be sure to save your changed order when you exit the BIOS setup utility. NOTE: Be aware that if you use the CD-ROM drive as the first boot device, certain files may be overwritten, depending upon your operating environment. Exiting from Boot Menu When you have finished setting the boot parameters with the Boot menu, you can either exit from the setup utility or move to another menu. [. . . ]