User manual TOSHIBA SATELLITE C840

[. . . ] Place your CLIÉ handheld in the cradle connected to the AC power adapter, then allow it to charge for a few minutes before turning it on. If it turns on, continue charging for approximately four hours and then perform a soft reset. My CLIÉ handheld does not respond Is the POWER/HOLD switch of your CLIÉ handheld in the HOLD mode?Your CLIÉ handheld does not work when the POWER/HOLD switch is in the HOLD mode. Make sure you release the HOLD mode. I cannot perform the HotSync® operation Check the following: · Your CLIÉ handheld is placed in the cradle properly. [. . . ] B When using a modem other than a CF modem card, check the battery power of the modem. Troubleshooting Checking your computer B Check that your computer is turned on and the automatic shut-off setting in the power saving mode is disabled. B Check that the modem is properly connected to the service line. B Click the HotSync icon at the bottom right of your computer screen, and check that the Modem check box is selected. B Check that the modem connected to your computer is turned on. You cannot turn on a modem with your CLIÉ handheld if the Auto-Off feature is set. B Check that the modem is properly connected to the serial port of your computer. B Check the Setup string setting in the Setup window of the HotSync Manager. b For details, refer to the manual of your modem. B If problems arise when the Speed in the Setup/Modem window is set to As fast as possible or some other specific speed, reduce the transmission speed setting. B Check that the Speed setting in the Setup/Modem window is appropriate for your modem. B Turn off the modem for a while and turn it on again. Test the USB port with another device, such as a USB mouse. If that device does not work, check the BIOS setting of your computer. In addition, check the setting in the Device Manager: Right-click My Computer and select Properties from the menu. (If you are using Windows 2000 Professional/Windows XP, click the Hardware tab. ) Click the Device Manager tab and check that USB controller is displayed in the Device Manager screen. If USB controller is not displayed b For details, refer to the manual of your computer. 30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I cannot beam data Verify the following first B Tap General in the Preferences screen and check that Beam Receive is set to On. B Make sure you point the IR port of your CLIÉ handheld directly to the IR port of the target device. B Make sure the distance between your CLIÉ handheld and the target device is 4 to 8 inches (approximately 10 to 20 centimeters). The optimum distance for beaming may vary depending on devices. B Sometimes file contents may be accidentally linked to the name of another file when you transfer many files at the same time using the IR port. Transfer files one by one when you use the IR port. Troubleshooting An error message is displayed indicating insufficient memory when I receive data via beaming B To receive data using the IR port, the free space of your CLIÉ handheld's memory must be more than twice the size of data to be received. If there is insufficient memory space in your CLIÉ handheld, delete any unnecessary data (after backing up any of that data you might need in the future) and try receiving data again. [. . . ] Wipe the terminal with a soft cloth, such as a cotton pad. B You cannot use "Memory Stick" media or CF memory card that is formatted in a device other than your CLIÉ handheld. Please format it on your CLIÉ handheld. B When the battery power of your CLIÉ handheld is running low, data on "Memory Stick" media and CF memory card may not be displayed. [. . . ]