User manual TOSHIBA SATELLITE L500-13Z CARACTERISTIQUES TECHNIQUES

[. . . ] User's Manual L500/L505/L500D/L505D computers. toshiba-europe. com L500/L505/L500D/L505D Copyright © 2009 by TOSHIBA Corporation. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein. TOSHIBA L500/L505/L500D/L505D Portable Personal Computer User's Manual First edition September 2009 Copyright authority for music, movies, computer programs, databases and other intellectual property covered by copyright laws belongs to the author or to the copyright owner. [. . . ] Indicator status Indicator off Indicator glows Indication No wireless functionality is available. Wireless LAN or Bluetooth is turned on by an application. 4-26 User's Manual L500/L505/L500D/L505D If you used the Taskbar to disable the wireless LAN, restart the computer or perform the following procedure to re-enable it: Click Start, open Control Panel, click System and Security, click Device Manager on System category, double-click Network Adapters, and right click the wireless device then choose Enable. Do not use the Wireless LAN (Wi-Fi) or Bluetooth functionalities near a microwave oven or in areas subject to radio interference or magnetic fields. Interference from a microwave oven or other source can disrupt Wi-Fi or Bluetooth operation. Turn Wi-Fi and Bluetooth functionalities off when near a person who may have a cardiac pacemaker implant or other medical electric device. Radio waves may affect pacemaker or medical device operation, possibly resulting in serious injury. Follow the instruction of your medical device when using any Wi-Fi or Bluetooth functionality. Always turn off Wi-Fi or Bluetooth functionality if the computer is near automatic control equipment or appliances such as automatic doors or fire detectors. Radio waves can cause malfunction of such equipment, possibly resulting in serious injury. It may not be possible to make a network connection to a specified network name using the ad hoc network function. If this occurs, the new network(*) will have to be configured for all computers connected to the same network in order to re-enable network connections. * Please be sure to use new network name. LAN The computer has built-in support for Ethernet LAN (10 megabits per second, 10BASE-T) and Fast Ethernet LAN (100 megabits per second, 100BASE-TX). This section describes how to connect/disconnect to a LAN. Do not install or remove a memory module while Wake-up on LAN is enabled. The Wake-up on LAN function consumes power even when the system is off. Leave the AC adaptor connected while using this feature. The Link speed (10/100 megabits per second) changes automatically depending on the network conditions (connected device, cable or noise, and so on). User's Manual 4-27 L500/L505/L500D/L505D LAN cable types The computer must be configured properly before connecting to a LAN. Logging onto a LAN using the computer's default settings could cause a malfunction in LAN operation. Check with your LAN administrator regarding set-up procedures. If you are using Fast Ethernet LAN (100 megabits per second, 100BASE-TX), be sure to connect with a CAT5 cable or higher. If you are using Ethernet LAN (10 megabits per second, 10BASE-T), you can connect with a CAT3 or higher cable. Connecting the LAN cable Connect the AC adaptor before connecting the LAN cable. The AC adaptor must remain connected during LAN use. [. . . ] Non-volatile here means that information in ROM remains whether or not the computer is receiving power. This type of memory is used to store your computer's BIOS, which is essential instructions the computer reads when you start it up. Compare RAM. S S/P DIF: A standard of digital interface for audio. SCSI: Small Computer System Interface is an industry standard interface for connection of a variety of peripheral devices. [. . . ]