User manual TOSHIBA SATELLITE PRO C660

[. . . ] Fujitsu, the Fujitsu logo, and LifeBook are registered trademarks of Fujitsu Limited. MS, MS-DOS, and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. HyperMemoryTM is a trademark of ATI Technologies, Inc. The ExpressCard word mark and logo are owned by the Personal Computer Memory Card International Association (PCMCIA) and any use of such marks by Fujitsu Computer Systems Corporation is under license. [. . . ] Click the Connect button to connect to the network. Click [Close] if you want to close the Intel(R) PROSet for Wireless window. address automatically]. If your network uses static IP addresses, consult with your network administrator for the correct IP address settings. Processing will return to the [Wireless Network Connection Properties] window. Following this operation, confirm the names of the computer and the workgroup as follows. Confirming the computer and work group names To modify the computer name and/or the work group name, you need to be logged in from Windows as an administrator. CONNECTION TO THE NETWORK This section explains connection to the network. If there is an administrator of the network, contact the network administrator for data settings. Setting the network Perform the "Setting TCP/IP" and "Confirming the computer and work group names" operations required for network connection. Setting TCP/IP To change the setting of the IP address, you need to be logged in from Windows as an administrator. 1. 2. Click the [Start] button, then [Control Panel]. If the Control Panel is in Category view, switch to Classic view by clicking "Switch to Classic View" under Control Panel the left frame. Click the [Start] button, then [My Computer]. Right-click the "work" folder (or whichever folder you want to share), and then click [Sharing and Security. . . ] in the menu displayed. The [Folder Name Properties] window will be displayed. Setting the file-sharing function for the file which has been used to execute Network Setup Wizard is suggested on the screen. For the wireless LAN, however, since security is guaranteed by entry of the network name (SSID) and the network key, the steps to be taken to set the filesharing function easily without using Network Setup Wizard are given below. Setting the sharing function Set the sharing function to make file and/or printer sharing with other network-connected personal computers valid. This operation is not required unless the sharing function is to be used. The folder and printer for which the sharing function has been set will be usable from any personal computer present on the network. To share a file and/or the connected printer, you need to be logged in as an administrator. Setting the Microsoft network-sharing service 1. Click the [Start] button first and then [Control Panel]. If the Control Panel is in Category view, switch to Classic view by clicking "Switch to Classic View" under Control Panel the left frame. (If you are already in Classic view, "Switch to Category View" will be displayed. ) Double-click [Network Connections]. A list of currently installed networks will be displayed. Right-click [Wireless Network Connection] in the list, and then click [Properties] in the menu displayed. [. . . ] These can be connected either with composite cables or S-Video cables. · Audio sources can be connected via the video audio input jack on the notebook. You can transfer audio and video from an external device such as an external VHS or DVD player by connecting it to your notebook. In order to connect an audio/video device, you will first need to purchase a standard RCA cable harness (red/white/yellow, max 1Vrms), as shown in Figure A3. S-Video Cable Connection Figure A5. [. . . ]