User manual TOSHIBA SD-H400

[. . . ] TOSHIBA DIGITAL MEDIA SERVER Identification OeControls SD-H400 SERIE~2 ]TMDigital Video Recorder DYD VIDEO'· [Q]o§@ IDIGITAL VIDEol ® [Q]o§@ DIGITAL AUDIO , . SPATIALIZER _ VIRTUAL SURROUND [](J IDOLBY I DIG I TAL Installation G 70971991 © 2003 Toshiba Corporation © 2003, Toshiba and TiVo Inc. Reproduction in whole or in part without written pennission is prohibited. Printed in China. TiVo, the TiVo logo, the Jump logo, and TiVo Central are registered trademarks of TiVo Inc. [. . . ] When the connection completes, you should see the message "Test Succeeded!" Press SELECT to return to Phone Dialing Options. : Set Dial-In Number. Use this to change the number the Recorder uses to make connections to the TiVo service. Select "Set Dial-In Number. " The Area Code screen appears. Use the number keypad on the remote to set the area code, then press SELECT. If you change the area code, or if the Recorder has not made a connection to the TiVo service in the last twenty-four hours, the Update Numbers screen appears and the Recorder connects to the TiVo service to retrieve a list of local dial-in numbers. Use the UP/DOWN arrow to choose one ofthe listed phone numbers. The Recorder will use this number for connections to the TiVo service. If your area code has no access numbers, you can press LEFT arrow to return to the Area Code screen and try a nearby area code. Toll charges may apply and are your responsibility. The Dialing Format screen appears after you have chosen a dial-in number. You should use this screen to tell the Recorder which dialing format to use. For example: should the dial-in number be preceded by your area code and should a "1" precede TiVo Central }> Messages & Setup }> Settings }> Phone & Network 39 ____C_h_a_p_t_e_r_4 _ the area code?In some areas, even local numbers must be dialed using the area code. Press SELECT to return to the Phone Dialing Options screen. Set Dial Prefix. Use this option if you normally dial a prefIx before making a phone call (for example, if you need to dial "9" to get an outside line). Use the number keys on the remote control to enter the prefIx. Press the PAUSE button after you have entered the prefIx. This will insert a comma, which will create a two second pause after the prefIx is dialed. If you have call waiting, you may choose to disable it while the Recorder is making a call, so that the Recorder's phone call is not interrupted. If you do not disable it, the Recorder may drop the call and allow the second call to ring through, depending on your phone system. The Recorder will then try its call again later. The most common code that phone companies use to disable call waiting is *70 (check with your phone company to find out how to disable call waiting in your area). [. . . ] The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, cons ult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. [. . . ]