User manual TOSHIBA SD-K530

[. . . ] DVD VIDEO PLAYER & VIDEO CASSETTE RECORDER SD-K530SU OWNER'S MANUAL Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely. ©2004 Toshiba Corporation This device does not tape-record copy protected DVD Video Discs. Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus. FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. [. . . ] ENTER to confirm rating 5 Presspress SETUP to exityourmenu. selection, then the If you forget your 4-digit Code If you forget your password, clear the current password by following the procedure below. 1 Press SETUP to display the setup menu. 2 Use the Number buttons to enter the 6-digit number "210499". The 4-digit password is cleared. 3 Enter a new password as shown above to the left (Rating). 20 Operation with tape Normal Playback Preparation: Turn on the TV. Tune the TV to the DVD+VCR output channel (CH 3 or 4) or set the TV's source selector to VIDEO. If a direct VIDEO/AUDIO connection is made between the DVD+VCR and the TV, set the TV's source selector to VIDEO. Set the Output Source to VCR as shown in Selecting the Viewing Source on page 6. Special Effect Playbacks Special effects playback notes 1 Insert a prerecorded video cassette. The indicator will light and the DVD+VCR will power-up automatically. Make sure that the TIMER indicator in the display window is not lighted. If a tape without a safety tab is inserted, the unit will start playback automatically. Search This function lets you quickly and visually search for a desired tape section in either direction: forward and reverse. The DVD+VCR will be activated in the SEARCH mode. 2 To return to playback, press PLAY. PLAY 2 Pressappearsonce. the TV screen . PLAY on 3 It is not necessary to select the tape speed for playback. It will be automatically selected by the DVD+VCR. In playback, the TV/VCR selector switches to VCR mode automatically. Still Picture and Frame-by-Frame Playback 1 Press PAUSE/STEP during playback. Still picture will appear on the TV screen. If a still picture vibrates vertically, stabilize it by pressing CH/TRK (+/-) on the remote control. If the DVD+VCR is left in the STILL mode for more than 5 minutes, the DVD+VCR will automatically enter the STOP mode to protect the tape and video heads. 2 Press PAUSE/STEP repeatedly to advance the Press STOP to stop playback. STOP appears on the TV screen. If the tape reaches the end before STOP is pressed, the DVD+VCR will automatically stop, rewind, eject, and it will turn itself off. Tracking Control Auto Tracking The automatic tracking function adjusts the picture to remove snow or streaks. The AUTO TRACKING function works in the following cases: When the ATR(AUTO TRK) button is pressed. A tape is played back for the first time. Streaks or snow appear because of scratches on the tape. video picture one frame at a time while viewing a still picture. 3 To return to playback, press PLAY. Slow Motion 1 Press SLOW during playback or still mode. [. . . ] DURING THE PERIOD FROM 91 DAYS AND BEYOND, FROM THE PURCHASE DATE, TACP WILL EXCHANGE A DEFECTIVE DVD/VCR COMBINATION WITH A NEW OR REFURBISHED PLAYER FOR A NOMINAL FEE. YOU MUST CONTACT TOSHIBA'S CONSUMER SOLUTIONS CENTER FOR INSTRUCTIONS ON HOW TO PROCESS YOUR EXCHANGE REQUEST. THE CONSUMER IS RESPONSIBLE FOR ALL INBOUND TRANSPORTATION AND INSURANCE CHARGES FOR THE DVD/VCR COMBINATION TO THE EXCHANGE CENTER. *Rental Units The warranty for rental units begin with the first rental or thirty (30) days from the date of shipment to the rental firm, whichever comes first. [. . . ]