User manual TOSHIBA SD-P4000

[. . . ] Introduction DIGITAL VIDEO 2 14-inch LCD TV/DVD COMBINATION Connections 14 Basic setup 21 TV operation 23 SD-P4000 OWNER'S MANUAL Basic playback 31 Advanced playback 34 Function setup 43 Others 47 ©2004 Toshiba Corporation Before operating the unit, please read this manual thoroughly. J5N00201A [E] (Cover) 1 6/8/04, 6:31 PM Introduction IMPORTANT SAFEGUARDS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: CAUTION: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] MTS broadcasts greatly enhance TV viewing by bringing you programs with high fidelity stereo sound. MTS also provides an extra channel called the Second Audio Program or SAP which broadcasters can use to transmit a second language for bilingual transmission or for other purposes. MENU AUDIO CANCEL /// Sound control adjustment Listening to stereo sound When the TV is turned on or a channel selection is made, make certain the "STEREO" appears on the screen. This means that Stereo broadcasting is available. You can enjoy stereo sound from the left and right speakers. · When mono broadcasting is received, no indication is displayed. · If the broadcast signal is not strong enough or clear stereo sound is not available, press AUDIO to change to mono sound. Press it again to return to the stereo sound. 1 2 3 Press MENU, then press option. or to select PICTURE AUDIO PICTURE PREFERENCE COLOR TEMPERATURE Press . or to select "AUDIO", then press PICTURE AUDIO PICTURE PREFERENCE COLOR TEMPERATURE STEREO CH 013 Press or to select the item you want to adjust, then press or to adjust the setting. Listening to SAP (Second Audio Program) When the TV is turned on or a channel selection is made, make certain the SAP appears on the screen. This means that the Second Audio Program broadcasting is available. STEREO SAP CH 013 BASS TREBLE BALANCE SURROUND 0 0 0 OFF BASS: Press or to adjust the bass sound. TREBLE: Press or to adjust the treble sound. BALANCE: Press or to obtain an equal sound level from both speakers. SURROUND: Press or to select "ON" or "OFF". ON: The dynamic presence and sound created offers a thoroughly enjoyable listening experience. OFF: Normal sound. To select desired sound Press AUDIO to select the desired sound. SEL. STEREO 4 After your desired setting press MENU repeatedly until the menu screen is cleared. MONO + SAP BROADCASTING MONO SOUND (MAIN) SAP SOUND To return BASS/TREBLE/BALANCE control adjustments to the factory preset levels Press CANCEL while making sound adjustments. STEREO+SAP BROADCASTING STEREO SOUND (MAIN) SAP SOUND MONO SOUND (MAIN) 30 J5N00201A [E] (P26-30) 30 6/8/04, 4:04 PM Basic playback Playing a disc This section shows you the basics on how to play a disc. CAUTION Keep your fingers well clear of the disc slot as it is closing. Neglecting to do so may cause serious personal injury. DVD VCD CD POWER VOLUME +/­ PLAY STOP EJECT Basic playback Preparations: · When connecting to other equipment, turn the power off. 1 Press POWER on the unit or on the remote control to turn on the unit. · Every time you press POWER, the TV/DVD starts from TV mode. · When using an amplifier, switch on the amplifier. 4 On the TV-screen, "No Disc" changes to "Reading" and then playback commences. No Disc Reading Basic playback 2 Press TV/DVD on the remote control to select DVD mode. The DVD startup screen will appear on the screen. "Reading" display will change to "No Disc". (If DVD disc has already loaded, No Disc playback will start automatically. ) · A menu screen will appear on the TV screen, if the disc has a menu feature. Press / or / to select title, then press ENTER. Title is selected and play commences. 5 Press VOLUME + or ­ to adjust the volume. 3 Load the disc in the disc slot. VOLUME 32 6 Load the disc in the disc slot with the label side facing forward. [. . . ] DURING THIS PERIOD, TACP WILL, AT TACP'S OPTION, REPAIR OR REPLACE A DEFECTIVE PART, WITH A NEW OR REFURBISHED PART, WITHOUT CHARGE TO YOU. YOU MUST CONTACT TOSHIBA'S CONSUMER SOLUTIONS CENTER FOR INSTRUCTIONS ON HOW TO PROCESS YOUR IN WARRANTY REPAIR REQUEST. THE CONSUMER IS RESPONSIBLE FOR ALL INBOUND TRANSPORTATION AND INSURANCE CHARGES FOR THE LCD TV/DVD COMBINATION TO THE REPAIR CENTER. *Rental Units The warranty for rental units begins on the date of the first rental or thirty (30) days from the date of shipment to the rental firm, whichever comes first. [. . . ]