User manual TOSHIBA SD-V593SU

[. . . ] Introduction 2 DIGITAL VIDEO Connections 16 DVD VIDEO PLAYER & VIDEO CASSETTE RECORDER Basic setup 25 SD-V593SU OWNER'S MANUAL Playback (VCR) 32 Recording (VCR) 37 Other functions (VCR) 42 Basic playback (DVD) 45 Advanced playback (DVD) 48 Function setup (DVD) 58 Others 65 2005 Toshiba Corporation This device does not tape-record copy protected DVD Video Discs. 2F90201A (E) COV 1 4/4/05, 9:01 PM Introduction SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, do not expose this appliance to rain or moisture. CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. FCC NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] You can select a recording channel in the recording pause mode. Recording one program while watching another While the VCR is recording, select your desired channel on the TV. When a TV is connected with an antenna cable only, press TV/VCR to select the TV position. The "VCR" display will go off and recording will continue. Select the TV channel you want to watch by using the TV channel selector. Note: Some Cable TV hookups do not permit viewing one channel while recording another. See pages & and ' . 38 2F90201A (E)p35-40 38 4/4/05, 9:02 PM One-touch Timer Recording (OTR) The One-touch Timer Recording feature provides a simple and convenient way to make a timed recording. DVD/VCR 09 CH +/ STOP SP/SLP DVD/VCR SELECT REC/OTR One-touch Timer Recording (OTR) Preparation: Turn ON the TV and select to the corresponding video input. Press DVD/VCR SELECT to select the VCR mode. (The VCR indicator will light. ) Example: One-touch Timer Recording for 30 minutes. 4 Press Direct channel selection buttons (09) or CH +/ to select the channel to be recorded. +0 1 Load a cassette tape with the erase prevention tab intact. The VCR will automatically turn on. Recording (VCR) 5 Press REC/OTR. Press the button again to stop recording after 30 minutes. Each additional press of REC/OTR will increase recording time as shown in the chart below, up to a maximum of 6 hours. The OTR and recording time will appear on the screen for about 4 seconds. And, " " will appear on the display. 2 Press SP/SLP to select the desired tape speed SP or SLP. The tape counter and "SP" or "SLP" will appear on the screen for about 4 seconds. Press Recording time NORMAL REC once 0:30 twice 1:00 3 times 1:30 4 times 2:00 5 times Press Recording time 3:00 6 times 4:00 7 times 5:00 8 times 6:00 9 times 10 times NORMAL REC OTR 0 : 30 CH 110 00 : 00 : 00 SP INDEX 3 Set "TV" or "CABLE" option to the appropriate position !. To cancel OTR Press STOP or turn off the power. TV - VHF/UHF channels CABLE - Cable TV channels " " will appear on screen for about 4 seconds. Note: If you wish to watch the DVD playback during OTR or standard recording, press DVD/VCR SELECT to change to DVD mode and perform the DVD playback "# . 39 2F90201A (E)p35-40 39 4/4/05, 9:02 PM Recording (VCR) DVD/VCR Timer recording Timer recording can be programmed on-screen with the remote control. The built-in timer allows automatic unattended recording of up to 8 programs within 1 month. SET +/ ENTER CANCEL VCR MENU EJECT DVD/VCR SELECT TIMER REC Timer recording Preparation: Press DVD/VCR to operate the DVD/VCR. Press DVD/VCR SELECT to select the VCR mode. Load a cassette tape with the erase prevention tab intact. Check the time and date are correct % . Example: Program a timer recording for the 26th day, channel 125 (Cable TV), 11:00 - 11:30 PM on timer program number 1 (Tape speed: SLP). 5 To enter other programs, repeat steps 2 through 4. To return to the normal screen, press VCR MENU twice. DATE START END CH 26(SA) 1 Press VCR MENU. Select "TIMER REC SET", then press ENTER. MENU TIMER REC SET AUTO REPEAT ON OFF ON OFF SAP CH SETUP SYSTEM SETUP +//ENTER/MENU ------------ :---- -- ------------ :---- -- ------------ :---- -- ------------ :---- -- ------------ :---- -- ------------ :---- -- ------------ :---- -- 11:00PM 11:30PM125 SLP --:---- --:---- --:---- --:---- --:---- --:---- --:---- ---- -- ---- -- ---- -- ---- -- ---- -- ---- -- ---- -- -- -- -- -- -- -- -- +/--/ENTER/CANCEL/MENU 6 Press TIMER REC. The timer symbol ( ) will appear on the display and the VCR stands by for recording. At the same time, VCR mode will change to DVD mode automatically. You can use DVD even if the VCR is in the timer recording mode. If you do not use the DVD, turn the power off. 2 Press SET + or to select one of the program line, then press ENTER. DATE +//ENTER/CANCEL/MENU START END : : : : : : : : : : : : : : : : CH 3 4 Press SET + or to select the date, then press ENTER. DATE START END CH 26(SA) Notes: The timer recording will start at 5 seconds before the time you predetermined. If the timer symbol ( ) does not appear on the display in spite of the pressing of TIMER REC, the cassette may not have been loaded ! [. . . ] DURING THE PERIOD THAT COMMENCES ON THE DATE THAT IS NINETY ONE (91) DAYS AFTER THE DATE OF ORIGINAL RETAIL PURCHASE AND BEYOND, TACP WILL EXCHANGE A DEFECTIVE DVD/VCR COMBINATION WITH A NEW OR REFURBISHED DVD/VCR COMBINATION FOR A NOMINAL FEE. YOU MUST CONTACT TACP'S CONSUMER SOLUTIONS CENTER FOR INSTRUCTIONS ON HOW TO PROCESS YOUR EXCHANGE REQUEST. THE CONSUMER IS RESPONSIBLE FOR ALL INBOUND TRANSPORTATION AND INSURANCE CHARGES FOR THE DVD/ VCR COMBINATION TO THE EXCHANGE CENTER. * Rental Units The warranty for rental units begins with the first rental or thirty (30) days after the date of shipment to the rental firm, whichever comes first. [. . . ]