User manual TOSHIBA SD-1008

[. . . ] CAUTION : The apparatus shall not be exposed to water, dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. This product is manufactured to comply with the radio interference requirements of EEC DIRECTIVE 89/336/EEC, 93/68/EEC and 73/23/EEC. CAUTION : THIS DIGITAL VIDEO PLAYER EMPLOYS A LASER SYSTEM. TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE READ THIS USER'S GUIDE CAREFULLY AND RETAIN FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE MAINTENANCE, CONTACT AN AUTHORIZED SERVICE LOCATION. CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LÁSER CLASE 1 USE OF CONTROLS, ADJUSTMENTS OR THE PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. [. . . ] The VCR can control the timer recording start and end times by the VPS/PDC signals to assure the recording of a whole programme, covering any changes in the published broadcast time, that is, time shift, extension or interruption of the programme. lf the TV programme is interrupted, during the VPS/PDC controlled timer recording, the recording will be automatically interrupted and resumed when the programme continues. Important: The VPS/PDC function only works when the VPS/PDC signal is transmitted with the TV programme to be recorded. If the broadcasting station does not transmit the VPS/PDC signal, the timer recording will be done in the normal mode even if it was programmed in the VPS/PDC mode. · Press the oe or button to select the hour or minute. or button to set the stop time. 7 Press the button to select Speed (recording speed). PR Day 1 SA Start 1 13 : :25 : : : : : 9 When you have finished, press the OK button to set the Timer Programming. Press the MENU button to exit the menu. Stop 19 :: 57 : : : : : Speed SP V/P 10 11 MENU VCR Functions Press the ON/STANDBY button to activate the timer. OK RETURN · Press the . . . or button to select the required recording speed. · Auto SP (Standard Play) LP (Long Play) · Auto Tape Speed Select The DVD-VCR's "Auto Tape Speed Select" function compares the duration of the timer recording to the actual recording time remaining on the tape loaded. If there is insufficient tape to complete a timer recording in Auto mode, the DVD-VCR automatically switches to LP mode to record the whole programme. Before starting recording, the DVD-VCR compares the timer duration with the remaining time on the cassette. · Press the ON/STANDBY button to stop Timer programming recording. · Timer Recording will not work when the power is on. 36 This feature allows you to adjust the alignment manually to obtain the best possible picture. When noise bars or streaks appear during playback, adjust alignment manually by pressing the TRK . . . or button until the picture is clear and stable. The tracking bar appears. The image is adjusted. 32 - English SD-1008SB/TSB-eng1 3/10/05 10:13 AM Page 33 Selecting the Audio Output Mode You can select the mode in which the sound is reproduced on the loudspeakers and AV outputs. Press the AUDIO button on the remote control until the required option is displayed. Option L R MIX MONO LR Description Used to listen to the sound on the left Hi-Fi channel. Used to listen to the sound on the right Hi-Fi channel. Used to listen to the mixed sound of the Hi-Fi and normal channels. Used to listen to the sound on the normal mono channel. Used to listen to Hi-Fi stereo sound on the left and right channels · When playing back tapes recorded in Hi-Fi, the sound switches to Hi-Fi after five seconds of Mono. Playing a Sequence Frame by Frame You can · Stop the cassette at a given frame (image) · Advance one frame at a time No sound is heard when playing back frame by frame. 1 Press the : · ll button to start playing the cassette. · ll button again to make still mode. · F. ADV button to advance frame by frame. [. . . ] Incorrect head cleaning can permanently damage the video heads. No playback picture or the picture is distorted You cannot see normal broadcasts Noise bars or streaks on playback When the II button is pressed during playback, the still picture has severe "noise bars" streaks Video Head Cleaning If when tuning in your TV to the DVD-VCR TV does not find the Screen or the pattern when found suffers from interference, it may be due to the DVD-VCR output channel clashing with the normal TV transmissions in your area. To prevent this you will need to change the DVD-VCR output channel in the following way 1. Remove the aerial input plug the socket marked (aerial symbol) on the rear of the DVD-VCR. Carry out the instructions "Tuning Your Television for the DVD-VCR" (see page 15). [. . . ]