User manual TOSHIBA SD-4109X

[. . . ] REFER SERVICING TO QUALIFIED PERSONNEL ONLY. TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU FOND. This Digital Video Disc Player employs a Laser System. [. . . ] Press the button repeatedly until the clock icon is highlighted. e. g. 1 1 ­:­­:­­ 2 Press the number buttons to enter the time. e. g. 1 2 5 1 3 1 0 1:25 :30 3 Press PLAY or ENTER. PLAY Playback starts from the desired location. ENTER 34 Playing Repeatedly You can play a specific title, chapter, group, track, or segment repeatedly. Cursor control CLEAR PLAY REPEAT A-B RPT DVD-V DVD-A VCD CD Repeating a title, chapter, group or track If you select the mode during playback, the DVD player automatically starts repeat playback after finishing the current title, chapter, group or track. 1 2 Press REPEAT. REPEAT The mode menu appears. Advanced playback Press REPEAT repeatedly or move the cursor control ( / ) to select the repeat playback mode. REPEAT 3 Press PLAY. PLAY The mode changes as follows (when using the REPEAT button): DVD-V DVD-A Chapter Repeat Track Repeat Title Repeat Group Repeat Track Repeat All Repeat The DVD player starts repeat playback. Press the PLAY button within about 5 seconds after you press the REPEAT button. ENTER DVD-V DVD-A VCD CD DVD-V DVD-A VCD CD To resume normal playback Press CLEAR. CLEAR Repeat off Chapter Repeat: Track Repeat: Title Repeat Group Repeat: All Repeat: Repeat Off: DVD-V DVD-A VCD CD Repeats the current chapter. Note Some discs may not permit repeat operation. Repeating a specific segment To resume normal playback Press CLEAR. CLEAR 1 2 Press A-B RPT at the beginning of the segment (point A) you want to play repeatedly. A-B RPT A­ Press A-B RPT again at the end of the segment (point B). A-B RPT The DVD player automatically returns to point A and starts repeat playback of the selected segment (A-B). A­B Notes · Some discs may not permit A-B repeat operation. · You cannot set the A-B repeat function for a segment that includes multiple camera angles 40 . · You can specify a segment only within the current title or track. · There may be a slight difference between point A and the location where playback actually resumes depending on the disc. 35 Advanced playback Playing in a Favorite Order You can combine your favorite titles, chapters, groups, or tracks and play them in the order you determine. You can program up to 30 selections into the memory. (Memory playback) Cursor control/ ENTER CLEAR 3 2 1 DVD-V DVD-A VCD CD Setting titles, chapters, groups or tracks in a favorite order To change the programmed selections 1 While the display appears on the TV screen, move the cursor control to highlight the item you want to change. 2 Change the selection following the instructions in step 2. 1 Insert a disc and press MEMORY during stop. MEMORY The following display appears. 1 TG:-- CT:--2 TG:-- CT:--3 TG:-- CT:--4 TG:-- CT:--5 TG:-- CT:--6 TG:-- CT:--7 TG:-- CT:--- To cancel the programmed selections 1 While the display appears on the TV screen, move the cursor control ( / ) to highlight the item you want to cancel. · The magnification level varies depending on the picture size you select. 58 · When using a DVD audio disc that includes pictures, this operation may be permitted in some picture segments. 38 Selecting the Sound Enhancement (E. A. M. *) You can easily switch a preferred audio enhancement. *E. A. M. : Enhanced Audio Mode 2 1, 2 DVD-V DVD-A VCD CD Selecting the sound enhancement To exit the audio enhancement selection Press ENTER. ENTER 1 Press E. A. M. E. A. M. The sound enhancement menu appears. Advanced playback Alternatively leave the DVD player unattended for about 5 seconds after having made a selection. 2 Press E. A. M. repeatedly or move the cursor control ( / ) to select the sound enhancement. E. A. M. Normal: Normal sound. ENTER Notes · Actual effects to sounds may vary depending on the speaker systems. Make selection according to your preference. · Actual effects to sounds may vary depending on the disc. · When the DVD player is connected to an amplifier equipped with Dolby Pro Logic Surround, select "Normal". Otherwise, Dolby Pro Logic Surround may function differently than usual. · Selecting "Dialogue" disables "Dynamic Range Control" function 61 . · When "Audio Out Select" 59 is set to "Analog 6ch, " "3D (N-2-2)" and "Dialogue" are ineffective. 3D (N-2-2): To obtain expansive virtual surround sound effects from just two speakers. Spatializer® 3-Dimensional Sound Processing provided by Desper Products. Certain audio features of this product manufactured under a license from Desper Products, Inc. , Spatializer® and the circle-in-square device are trademarks owned by Desper Products, Inc. Dialogue: To control critical center channel information to make dialogue more intelligible (only when playing a DVD video disc recorded on the Dolby Digital recording system). [. . . ] This is one way to enable TACP to provide you with better customer service and improved products. Failure to return the card will not affect your rights under this warranty. Your Responsibility The above warranties are subject to the following conditions: (1) You must retain your bill of sale or provide other proof of purchase. (2) You must notify a TACP/THI/TCL /Authorized Service Station within thirty (30) days after you discover a defective product or part. [. . . ]