User manual TOSHIBA SD-9200

[. . . ] DIGITAL VIDEO DVD VIDEO PLAYER SD-9200 Sep. , 2000 s Introduction SAFETY PRECAUTIONS WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR AVIS The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. [. . . ] · When you set "Title/Group Stop" to "Off" 63 , you can access chapters in another title. If you go back to the button, the DVD preceding title by pressing the SKIP player locates the first chapter of the title. When "Title/Group Stop" is set to "On, " you can access chapters only within the current title. · If you press and hold the SKIP or button on the front panel during playback, the DVD player performs fast reverse or fast forward playback. You can vary the speed by pressing the button further. To locate chapters or tracks during fast reverse or fast forward playback, first press the PLAY button to resume normal playback, then use the SKIP or button. Press SKIP or repeatedly to display the chapter or track number you want. Playback starts from the selected chapter or track. SKIP To locate succeeding chapters or tracks. Playback starts from the beginning of the current chapter or track. When you press twice, playback starts from the beginning of the preceding chapter or track. SKIP 32 Advanced playback Customizing the performance of your DVD player. Accessing a Specific Location Directly Playing Repeatedly Playing in a Favorite Order Playing in Random Order Zooming a Picture Selecting DNR Picture Enhancement Selecting the Camera Angle Selecting Subtitles Selecting a Language Advanced playback Accessing a Specific Location Directly You can access a specific location by entering its corresponding time (hours, minutes, seconds). 3 1 2 DVD-V DVD-A VCD CD Entering the time of the desired location Notes · Some discs may not respond to this process. · Some scenes may not be located precisely as you specified. · This method for accessing specific locations is available only within the current title of the DVD video disc or within the current track of the VIDEO CD/audio CD. 1 Press T twice. SEARCH T You may have to press further depending on the disc. Press the button repeatedly until the following display appears. Time -:- - :- - 2 3 Press the number buttons to enter the time. e. g. 1 2 5 3 0 Time 1 : 25 : 30 Press PLAY. PLAY Playback starts from the desired location. 34 Playing Repeatedly You can play a specific title, chapter, group, track, or segment repeatedly. CLEAR PLAY REPEAT A-B RPT DVD-V DVD-A VCD CD Repeating a title, chapter, group or track 1 Press REPEAT. REPEAT Each time you press the REPEAT button, the repeat mode changes as follows. Chapter Repeat 2 Press PLAY. PLAY The DVD player starts repeat playback. Press the PLAY button within about 5 seconds after you press the REPEAT button. Advanced playback DVD-V DVD-A DVD-V DVD-A VCD CD DVD-V DVD-A VCD CD Chapter Repeat Repeats the current chapter. Title Repeat Group Repeat Track Repeat Track Repeat Repeats the current title. Repeats the current track. To resume normal playback Press CLEAR. CLEAR Note Some discs may not permit repeat operation. All Repeat Repeats the entire disc. Repeat off Resumes normal playback. DVD-V DVD-A VCD CD Repeating a specific segment To resume normal playback Press CLEAR. CLEAR 1 2 Press A-B RPT at the beginning of the segment (point A) you want to play repeatedly. A-B RPT A­ Press A-B RPT again at the end of the segment (point B). A-B RPT The DVD player automatically returns to point A and starts repeat playback of the selected segment (A-B). A­B Notes · Some discs may not permit A-B repeat operation. · You cannot set the A-B repeat function for a segment that includes multiple camera angles 40 . · You can specify a segment only within the current title or track. · There may be a slight difference between point A and the location where playback actually resumes depending on the disc. 35 Advanced playback Playing in a Favorite Order You can combine your favorite titles, chapters, group, or tracks and play them in the order you determine. You can program up to 30 selections into the memory. (Memory playback) Title: 2 Chapter: 25 Title: 2 Chapter: 12 Title: 1 Chapter: 1 Cursor control/ ENTER CLEAR 3 2 1 DVD-V DVD-A VCD CD Setting titles, chapters, group or tracks in a favorite order To change the programmed selections 1 While the "Memory List" display appears on the TV screen, move the cursor control ( / ) to highlight the item you want to change. 2 Change the selection following the instructions in step 2. 1 Insert a disc and press MEMORY during stop. MEMORY The following display appears. Memory List TG : - - CT : - TG : - - CT : - TG : - - CT : - TG : - - CT : - TG : - - CT : - TG : - - CT : - TG : - - CT : - - TG: Title number or group number CT: Chapter number or track number 1 2 3 4 5 6 7 To cancel the programmed selections 1 While the "Memory List" display appears on the TV screen, move the cursor control ( / ) to highlight the item you want to cancel. 2 Press CLEAR. 2 Select the items in the order you want by pressing the number buttons, then ENTER for each item. Each time you move the cursor control ( / ), the spaces of "TG" and "CT" are highlighted in turn. [. . . ] (3) All warranty servicing of this product must be made by a TACP/THI/TCL Authorized Service Station. warranties are effective only if the product is purchased and operated in the Continental U. S. A. (5) Labor service charges for set installation. Set up, adjustment of customer controls and installation or repair of antenna systems are not covered by this warranty. [. . . ]