User manual TOSHIBA SD-V291

[. . . ] Introduction 2 DIGITAL VIDEO Connections 14 DVD VIDEO PLAYER & VIDEO CASSETTE RECORDER Basic setup 22 SD-V291 OWNER'S MANUAL Playback (VCR) 29 Recording (VCR) 34 Other functions (VCR) 39 Basic playback (DVD) 42 Advanced playback (DVD) 45 Function setup (DVD) 55 Others 67 2003 Toshiba Corporation This device does not tape-record copy protected DVD Video Discs. Introduction IMPORTANT SAFEGUARDS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, do not expose this appliance to rain or moisture. CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] The tape will automatically rewind to the beginning and the playback will be repeated. Zero return function This function rewinds the tape to the "00:00:00" counter position automatically. 1 Press VCR MENU. Press SET + or to select "AUTO REPEAT". SET + 1 Press CLOCK/COUNTER. The counter display shows the tape running time during playback or recording. VCR MENU SETUP CH CH + ENTER MENU TIMER REC SET AUTO REPEAT ON OFF ON OFF SAP CH SETUP SYSTEM SETUP CLOCK/COUNTER SET +/-/ENTER/MENU 2 Press ENTER to select "ON" or "OFF". If "ON" is selected, the playback will be repeated endlessly. SET + 2 Press COUNTER RESET at the desired tape position. The counter display will be reset to "00:00:00" position (e. g. the beginning of recording). CH ENTER CH + SET MENU TIMER REC SET AUTO REPEAT ON OFF ON OFF SAP CH SETUP SYSTEM SETUP COUNTER RESET ANGLE +/-/ENTER/MENU 3 4 Press VCR MENU until the menu screen is cleared. VCR MENU SETUP 3 If you press CALL, " " will appear on the screen 11 . Press STOP when playback or recording is completed. Press ZERO RETURN. The tape will automatically rewind or fast forward to the "00:00:00" counter position. STOP To commence playback, press PLAY. PLAY The playback will be repeated endlessly. ZERO RETURN JUMP To cancel repeat mode: Follow the above step 1, then press ENTER to select "OFF" position. Press VCR MENU to return to the TV. 32 VCR DVD CLOCK/COUNTER INDEX +/ STOP Clock/counter display Press CLOCK/COUNTER. The clock and tape counter alternate with each other in the display window. COUNTER CLOCK/COUNTER Video index search system This function enables you to locate the beginning of any recording made on the VCR. Recording an INDEX mark The Index Search function automatically records an INDEX mark on the tape whenever a recording is initiated. CH 001 Playback (VCR) INDEX CLOCK Press VCR DVD selector. The DVD mode and the VCR mode alternate with each other in the display. DVD mode VCR DVD Index search Press INDEX + or during stop or play mode. (As many as 9 index points can be accessed via this method. ) When the INDEX + or is pressed, +3 the unit starts searching the INDEX NO. selected and finds the portion, then playback starts automatically. To stop the Index Search, press STOP. INDEX SKIP STOP INDEX + SKIP or is displayed INDEX NO. (up to 9) VCR mode Notes: When you record an INDEX mark at the very beginning of the tape, the mark may not be found. During INDEX search, the tape may stop and begin to play at a slightly different location. INDEX may not function properly with old or worn out video tapes. INDEX marks may not be found if it is extremely close to the point where the search began. In recording, if you stop recording temporarily, the INDEX mark is not recorded on the tape. Notes: If you rewind the tape beyond "00:00:00", a minus sign ("") will be displayed in front of the time. When you load a tape, the counter will reset to "00:00:00". The counter does not function on nonrecorded (blank) sections of the tape. When you rewind, fast forward or play tapes through blank sections, the counter stops. SQPB (S-VHS Quasi Playback) You can playback video cassette tapes recorded in the S-VHS system. However, the picture will not have the high resolution of S-VHS system. Note: You cannot record S-VHS video format with this VCR. 33 Recording (VCR) VCR DVD 4 2 5 Recording a TV program Recording and viewing the same TV program. 4 Recording a TV program Preparation: Turn ON the TV and select to the corresponding video input. Press VCR DVD selector to select the VCR mode. [. . . ] warranties are effective only if the product is purchased and operated in the Continental U. S. A. (5) Labor service charges for set installation. Set up, adjustment of customer controls and installation or repair of antenna systems are not covered by this warranty. Reception problems caused by inadequate antenna systems are your responsibility. [. . . ]