User manual TOSHIBA SL-4700

[. . . ] The outside of the machine may be wiped down with a clean cloth moistened with water containing a small amount of washing up liquid. SL-4700 Owner Manual 5 1 Warnings Safety Summary Personal safety in handling or maintaining the equipment is extremely important. Warnings and Cautions necessary for safe handling are included in this manual. All warnings and cautions contained in this manual should be read and understood before handling or maintaining the equipment. Do not attempt to effect repairs or modifications to this equipment. [. . . ] Pulling on the cord portion may cut or expose the internal wires and cause fire or electric shock. Connect a grounding wire. No disassembling. Do not remove covers, repair or modify the machine by yourself. You may be injured by high voltage, very hot parts or sharp edges inside the machine. This indicates that there is CAUTION objects if the machines arethe risk of personal Injury or damage to improperly handled contrary to this indication. Precautions The following precautions will help to ensure that this machine will continue to function correctly. Try to avoid locations that have the following adverse conditions: * Temperatures out of the specification * Direct sunlight * High humidity * Shared power source * Excessive vibration * Dust/Gas Do not subject the machine to sudden shocks. Keys will operate correctly if they are touched lightly. by wiping with a dry cloth or a cloth soaked with detergent and wrung out thoroughly. Never use thinner or other volatile solvent for cleaning. To ensure that the scale is operating correctly, place a known weight on the platter and check it for correct weight measurement. This should be done every morning before starting normal operations. When moving the machine, take hold of the case and lift the machine. Do not place the machines on unstable or slanted surfaces, as they may drop or fall and cause injury. DO NOT STORE the paper or ribbons where they might be exposed to direct sunlight, high temperatures, high humidity, dust, or gas. Ensure the machine is operated on a level surface. Any data stored in the memory of the machine could be lost during a machine fault. Try to avoid using this equipment on the same power supply as high voltage equipment or equipment likely to cause mains interference. Unplug the machine whenever you are working inside it or cleaning it. Keep your work environment static free. Do not place heavy objects on top of the machines, as these items may become unbalanced and fall causing injury. Do not block the ventilation slits of the machines, as this will cause heat to build up inside the machines and may cause fire. It may fall on you and could cause injury. Care must be taken not to injure yourself with the printer paper cutter. Unplug the machine when it is not used for a long period of time. Request Regarding Maintenance Utilize our maintenance services. [. . . ] Re-enter Management mode and repeat the procedure E 152 Prohibited function. For example: 200 = 2 seconds 150 = 1½ seconds 100 = 1 second Enabling key timeout Go to branch 74, Sub-branch 01 74. 01 1 0 = Disabled 1 = Enabled SL-4700 Owner Manual 21 7 Before you call for service Changing the timeout period Go to branch 74, Sub-branch 02 6 Enter a value in units of 10 milliseconds (1 - 255). For example: 200 = 2 seconds 150 = 11/2 seconds 100 = 1 second 7 Before you call for service It is our primary concern to give you full satisfaction and better service. If, however, any problem arises in connection with the operation of this scale, please check the following points before calling for service. G G Is the power plug fully plugged into an AC outlet? [. . . ]