User manual TOSHIBA SSW1020

[. . . ] 7 Quick Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Selecting positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 The Time Display ­ analogue only . . . . . . . . . . . 21 Stereo and Bilingual transmissions . . . . . . . . . . . . [. . . ] Assisted Setup (setup by using the AP's notification information) Network Name, Authentication, and Encryption are decided based on information from the AP. Manual Setup (manual input of all settings) g When the PIN code window appears, enter the displayed PIN into your AP, and then press Next to continue the PIN Setup. When a message displays to report that the setup is complete, press Q. 33 CONTROLS AND FEATURES English To cancel searching for the AP: Press RETURN while searching for the AP. A message will appear, then press C or c to select Yes and press Q. Assisted Setup c Press B or b to highlight Manual Setup, and press Q. Wireless Setup Easy Setup Assisted Setup Manual Setup On a b c In the PREFERENCES menu, highlight Network Setup and press Q. Press B or b to highlight Wireless Setup, and press d e f Press B or b to highlight Network Name, and press Q. The Software Keyboard window will appear. Input the Network Name by using the Software Keyboard (see page 37). To save your setting, press the BLUE button. Press B or b to highlight Authentication, and then press C or c to select Open System, Shared Key, WPA-PSK or WPA2-PSK. Press B or b to highlight Encryption, and then press C or c to select None, WEP, TKIP or AES. · It is recommended to use IEEE 802. 11n on 5 GHz for HD video streaming. · It is recommended that the encoding rate for streaming video content is 20 Mps or less. · It is not recommended to use 2. 4 GHz for audio and video streaming. · Content playback may be interrupted by various surrounding interference. Advanced Network Setup NOTE: · When the DHCP function of the router connected with this TV is On, you can set Auto Setup to On or Off. (This should usually be set to On. ) · When the DHCP function of the router is Off, set Auto Setup to Off, and set the IP Address manually. c The Wireless Information window will appear. NOTE: Press the RED button to scan for all available APs. Item Description Connected is displayed when the TV is connected with the AP. Disconnected is displayed when the TV is not connected with the AP. Connection signal strength with AP (STRONG/MEDIUM/WEAK) Link with AP Working mode (11a, 11b, 11g, 11n) Channel in use (1-165) Status IP Address Setup Auto Setup: Signal Speed Mode Channel Authentication Encryption Security Key AP MAC Address USB MAC Address DHCP a b In the PREFERENCES menu, highlight Network Setup and press Q. Press B or b to highlight Advanced Network Setup, and press Q. Network Setup Network Type Wireless Setup Advanced Network Setup Wired Network Name SSID set Authentication set Encryption set Security Key set The AP's MAC address is displayed when the TV is connected with the AP. The MAC address of the USB (Dual Band WLAN Adaptor) is displayed. [. . . ] Turn off the power, clean the screen and cabinet with a soft, dry cloth. We recommend that you do not use any proprietary polishes or solvents on the screen or cabinet as this may cause damage. The following information is only for EU-member states: Disposal of products The crossed out wheeled dust bin symbol indicates that products must be collected and disposed of separately from household waste. Integrated batteries and accumulators can be disposed of with the product. [. . . ]