User manual TOSHIBA SX2801

[. . . ] , OWNER S MANUAL SX-2801 900MHz DIGITAL SPREAD SPECTRUM CORDLESS TELEPHONE Preparation Basics Caller ID/Call waiting Additional Information The FIRST thing to do after unpacking your new cordless telephone is: CHARGE THE BATTERY !Please read and follow the few instructions on PAGE 2 BEFORE YOU DO ANYTHING ELSE. GETTING STARTED: DO THIS FIRST! FIRST, CHARGE THE HANDSET BATTERY!· Set your new phone in an out-of-the-way place near a power outlet where it will not be disturbed. · Plug the AC adaptor into the wall outlet. [. . . ] 5 Press five times then press to move the cursor to MEM SELECT 8 3 the right. 6 Press 7 Press 8 Press 9 Press 24 3 3 6 3 four times then press once. five times. twice to enter a space. MEMORY DIALING 10 When finished, press 11 Press stored. 12 Press . 1 1 2 SELECT 3 4 . 5 6 7 8 9 0 to be SELECT IF YOU MAKE A MISTAKE WHILE ENTERING A NAME or to move the cursor to the incorrect character. Press to erase the wrong entry, then enter the correct character. To delete all characters, press and hold DELETE . DELETE Use Basics DIALING A STORED NUMBER 1 Pick up the handset and press . 2 Press , or enter a two-digit number MEM s 01sTed Doe 02 DOE JOHN 03 MOM AND DAD (01-20) to display the desired destination. NOTE: When you press SELECT , the LCD displays both the name and the telephone number. When the stored phone number has 14 or more Ted Doe digits, is displayed next to the 12th digit. Press 1234567890 to see the rest of the numbers, and to return. 3 Press TALK . The selected number will be dialed. NOTE: If you press MEM while you are selecting a location, memory selection is cancelled and the handset returns to standby. 25 MEMORY DIALING EDITING AND DELETING STORED NUMBERS You can delete a number or simply store another one in its place. When you store a new phone number, the data stored in that memory location is deleted automatically. 1 Pick up the handset and press and hold The confirmation tone sounds. MEM . 2 Enter a two-digit number (01-20) or press 3 Press Basics SELECT Memory Store s 01sTed Doe 02 DOE JOHN , to select the memory location you want to edit/delete. . sEdit Memory01 Delete Memory01 Go Back 4 Press or to select the desired function and press . To edit the stored data, select "Edit Memory. " To delete the data, select "Delete Memory. " sEdit Memory01 To return to the previous screen, select "Go Delete Memory01 Back. " Go Back SELECT 5 To edit data, go to step a. a EDITING THE NAME AND TELEPHONE NUMBER Use the number buttons and or buttons to edit the name. (See "Storing Numbers" on page 22 for instructions on how to enter names). (1) Press DELETE to erase a character at the Store Name cursor position. Ted Doe The next character on the right moves to the cursor position. Store Number 1234567890 (3) Press DELETE to erase numbers, and enter the correct number. A confirmation tone sounds and the number is stored. Press MEM or return the handset to the base unit. 26 Memory01 Stored MEMORY DIALING DELETING THE STORED DATA (1) Press or to move the pointer to select or . (2) Press SELECT b Delete Memory01?Yes sNo or DELETE . If is selected: A confirmation tone sounds and the number is erased. If is selected: The LCD returns to the "Memory Store" display. [. . . ] If this happens, the phone company will notify you and give you the opportunity to correct the problem. Also, you need to know that the phone company does have the right to make changes in their lines and/or equipment. If these changes might affect your telephone equipment (or require changes in the telephone equipment or its connection), the phone company will notify you in writing, so you have the chance to take whatever action necessary to ensure uninterrupted phone service. FCC REQUIREMENTS You are no longer required by the FCC to notify your local telephone company of your intent to connect a new telephone. Your local telephone company may call you and request information about your phone such as: the brand name, model number, registration number, and ringer equivalence number. [. . . ]