User manual TOSHIBA TECRA 9000 FIELD REPLACEABLE UNIT DOCUMENTATION

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual TOSHIBA TECRA 9000. We hope that this TOSHIBA TECRA 9000 user guide will be useful to you.

Lastmanuals help download the user guide TOSHIBA TECRA 9000.


Mode d'emploi TOSHIBA TECRA 9000
Download

You may also download the following manuals related to this product:

   TOSHIBA TECRA 9000 (3952 ko)

Manual abstract: user guide TOSHIBA TECRA 9000FIELD REPLACEABLE UNIT DOCUMENTATION

Detailed instructions for use are in the User's Guide.

[. . . ] Pull out the select bay device in the direction of the arrow. M2x8 silver Connector cover screws 1. Remove five M2x3 silver screws securing the base cover and lift off the base cover. Remove two M2x8 silver screws securing the connector cover. [. . . ] Spread the Mini-PCI connector clips and pull the Wireless LAN card out of the connector about 45 degree angle. Glass tape M2. 5x14 black screw LCD/FL cable M2. 5x2. 8 silver flat PJ127 head screws M2x12 silver screws Speaker cable M2. 5x16 silver screws 1. Turn the computer upside down and remove the following screws: -2 M2. 5x2. 8 silver flat head screws -1 M2. 5x4 black flat head screw -4 M2. 5x8 silver screws -4 M2x12 silver screws -6 M2. 5x16 silver screws 2. Turn the computer right side up and open the display. PJ122 M2. 5x8 silver screws Membrane switch cable 3. Disconnect the speaker cable from PJ127 and the membrane switch cable from PJ122 on the top board 4. Remove the glass tape securing the LCD/FL cable and disconnect the cable from the bottom board. Remove two M2. 5x8 silver screws and one M2. 5x14 black screw from the keyboard area. Note: When installing the top cover, ensure that the bluetooth coaxial cable is properly routed to the Bluetooth slot. Tough Enough for Today's World. TOSHIBA FIELD REPLACEABLE UNIT DOCUMENTATION Tecra 9000 Series COOLING MODULE REMOVAL Cooling module Fan cable CPU TM CPU REMOVAL M2. 5x10 black flat head screws Open Glass tape PJ770 Close 1. Remove the glass tape securing the fan cable and disconnect the cable from PJ770 on the top board. Remove four M2x10 black flat head screws securing the cooling module. Lift out the cooling module. Thermal conductor CPU lock 1. Insert a flat head screwdriver and rotate it counter-clockwise to unlock the CPU lock. Lift out the CPU. MICROPHONE REMOVAL SD/SOUND BOARD REMOVAL SD interface cable PJ1001 Sound interface cable PJ1000 Microphone PJ1003 Microphone cable 1. Disconnect the microphone cable from PJ1003 on the SD/Sound board. Lift out the microphone. M2. 5x4 brass screws SD/Sound board 1. Disconnect the SD interface cable from PJ1001 and sound interface cable from PJ1000 on the SD/sound board. Remove two M2. 5x4 brass screws securing the SD/Sound board. [. . . ] Carefully insert your fingers between the mask and the LCD panel and pry open the latches starting from the six top latches, to the five latches on each right and left sides, ending with the bottom seven latches. LCD/ FL cable FL inverter board M2x3 silver screw FL cable 1. Remove one M2x2. 8 silver screw securing the FL inverter board. Carefully lift up the FL inverter board and disconnect the LCD/FL cable from CN1 and the FL cable from CN2. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE TOSHIBA TECRA 9000

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual TOSHIBA TECRA 9000 will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag