User manual TOSHIBA TLP B2

[. . . ] CONTENTS 1 Before use OWNER'S MANUAL 3LCD DATA PROJECTOR TLP-B2U SAFETY PRECAUTIONS WARNING: CONTENTS 2 TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. REFER SERVICING TO QUALIFIED PERSONNEL ONLY. Before use The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. FCC NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. [. . . ] To release the picture, press FREEZE again. Note If you perform other operation while freezing the picture, the picture freezing operation is released. Operations Enlarging the picture size You can enlarge the picture size projected. ZOOM CONTENTS 32 Press ZOOM (+). + Each time the ZOOM (+) button is pressed, the enlargement ratio increases. To decrease the enlargement ratio, press the ZOOM () button. / / / buttons shifts the picture part ZOOM + Operations ENTER RESET Press the RESET button to cancel the zoom operation. Notes Picture enlargement display will return to the normal size after the power turns off and on again. Some signals cannot be applicable for the enlargement operation. The picture may not be projected properly while shifting the picture. Since the electrical digital zoom system is employed, the picture quality may be degraded in accordance with the enlargement ratio. If you perform other operation, the zoom operation is cancelled. Menu screen structure Most of adjustments and settings are made on the menu screen. Press MENU button, to display the menu screen. Quick menu and full menu are provided in the menu screen. CONTENTS 33 Quick menu QUICK MENU Contrast Brightness Phase Auto keystone FULL MENU Full menu You can set the Basic setting used frequently. 34 Picture adjustment Contrast Brightness Color Tint Sharpness You can set all kinds of setting. Contrast Brightness Phase Auto keystone FULL MENU To adjust the contrast. To correct the keystone distortion of the picture projected automatically. To change to the full menu screen. Picture adjustment Image adjustment Level adjustment 36 38 Contrast, Brightness, Color, Tint, Sharpness Keystone, Phase, Horizontal position, Vertical position, Clock Adjustments 40 42 Red level, Green level, Blue level Notes Select the "QUICK MENU" of the "Display setting" menu to change the display from full menu screen to quick menu screen. Pressing the MENU button again after exiting from the menu screen will display the screen displayed at last or the screen prior to that. The quick menu is displayed when the power turns on for the first time. Operation guide (indicated by the illustration of unit buttons) appears on the lowest portion of the menu screen, follow it when operating. Audio adjustment Signal setting Volume, Channel select (Left+Right, Left, Right), Output select (Always, Video only, RGB only) Picture mode (Bright, True color), Video mode (Auto, NTSC, NTSC4. 43, PAL, PAL-N, SECAM, PAL60, PALM), No signal background (TOSHIBA logo, Blue background), No signal power off (OFF, 5 minutes) Quick menu, Menu position (Upper left, Upper right, Lower right, Lower left), Menu background color (Clear, Blue), On screen display (On, Off) Language (English, French, German, Italian, Spanish, Portuguese, Japanese, Simplified Chinese, Traditional Chinese, Korean), Projection mode (Standard, Rear, Ceiling, Rear ceiling), Start up display (On, Off), Power on (Manual, Auto) Status display, Factory reset mode, Keystone reset 44 Display setting 47 Default setting 49 Data setting 52 Quick menu setting You can set the basic setting used frequently. CONTENTS Preparation 1 Project a picture on the screen as explained in the step "Projection on the screen". 34 25 1 MENU Press MENU. The quick menu screen appears. QUICK MENU Contrast Brightness Phase Auto keystone FULL MENU MENU 2 3 ENTER Select the setting item (Contrast, Brightness, Phase, Auto keystone, FULL MENU) by pressing / . Adjustments (When selecting "Contrast", "Brightness" or "Phase" in step 2. ) Adjust the item by pressing : +: /. () (+) Contrast: Lower Higher Brightness: Darker Brighter Phase: Adjust when a flicker occurs (When selecting "Auto keystone" in step 2. ) Press ENTER. The keystone distortion on the picture projected is automatically corrected and the fine adjustment screen of the keystone distortion correction appears. Continued ENTER Quick menu setting (Continued) CONTENTS 35 You may perform the fine adjustment by pressing / buttons. After a few seconds, the fine adjustment screen disappears. (When selecting "FULL MENU" in step 2. ) ENTER Press ENTER. The screen changes to the full menu screen. 33 ENTER 4 Notes MENU Press MENU several times until the quick menu screen disappears. Adjustments MENU Pressing the MENU button will return to the previous setting screen. You can adjust the "Contrast" and "Brightness" for every input sources (RGB, Video). You can not adjust the "Phase" at Video input. The value(s) adjusted for keystone distortion correction, contrast, brightness and/or phase is memorized. [. . . ] Display Data Channel is a trade mark of Video Electronics Standard Association. Others LIMITED WARRANTY TOSHIBA TLP-B2 Series 3LCD Data Projector Toshiba America Consumer Products, Inc. (TACP) makes the following limited warranties. These limited warranties extend to the original end-user purchaser. CONTENTS 66 Limited two (2) Years Warranty of Parts and Labor TACP warrants this product and its parts against defects in materials or workmanship for a period of two years after the date of original retail purchase. For a period of two years after the date of original retail purchase, TACP will repair a defective product or a part, without charge to you. [. . . ]