User manual TOSHIBA TP48C71

[. . . ] Use a soft dry cloth to clean the panel. Never use solvents such as alcohol or thinner to clean the panel surface. The plasma display panel consists of fine picture elements (cells). Although TOSHIBA produces the plasma display panels with more than 99. 99 percent active cells, there may be some cells that do not produce light or remain lit. [. . . ] To close the main menu, press the EXIT button once more. Information NR · "NR" stands for Noise Reduction. · This function reduces noise in the picture. Types of noise reduction There are three types of noise reduction. Each has a different level of noise reduction. The effect becomes stronger as the number increases (in the order NR-1 NR-2 NR-3). Turns the noise reduction function off. : MEMORY :2 : OFF EXIT RETURN 3. Use the and buttons to select "NR-3. " and The mode switches as follows when the buttons are pressed: OFF NR-1 NR-2 NR-3 NR : NR-3 · If neither the or button is pressed within 5 seconds, the current selection is set and the previous screen reappears. 26 Sound Settings Menu Adjusting the treble, bass and left/right balance The treble, bass and left/right balance can be adjusted to suit your tastes. Example: Adjusting the bass Press the PROCEED button on the remote controller to display the MAIN MENU on the screen, then. . . Use the v and w buttons to select "SOUND, " then press the PROCEED button. Use the v and w buttons to select "BASS. " SOUND BASS TREBLE BALANCE L R To continue adjusting the sound . . . Press the EXIT button to return to the main menu. To close the main menu, press the EXIT button once more. Note : If "CAN NOT ADJUST" appears. . . Adjusts the vertical position of the image. Adjusts the horizontal position of the image. (Except for JUST mode) H-WIDTH . . . . . . . . . Adjusts the horizontal size of the image. Adjusts for striped patterns on the image. * The Picture ADJ and Fine Picture features are available only when the "Auto Picture" is off. The Auto Picture, Fine Picture and Picture ADJ features are available only for RGB signals. Restoring the factory default settings Select "RESET" under the function menu. Note that this also restores other settings to the factory defaults except for Auto Picture. Function Settings Menu Setting the on-screen display When using the display for presentations, etc. , the display can be set so that the input source, screen mode, etc. , do not appear. Example: Turning the on-screen display mode off Press the PROCEED button on the remote controller to display the MAIN MENU on the screen, then. . . Use the v and w buttons to select "FUNCTION, " then press the PROCEED button. [. . . ] Depending on the type of repair required, either the service will be performed in your home or the set will be taken to the TCL Authorized Service Depot for repair and returned to your home at no cost to you. IN-HOME SERVICE ONLY APPLIES WITHIN 100 KILOMETERS OF AN AUTHORIZED TCL SERVICE DEPOT. Rental Units The warranty for rental units begins with the date of first rental or thirty (30) days from the date of shipment to the rental firm, whichever comes first. *Commercial Units Plasma displays sold and used for commercial purposes have a limited ninety (90) day warranty for all parts, labor. [. . . ]