User manual TOSHIBA TP50H50

[. . . ] This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the distance between the equipment and receiver. [. . . ] If you program the OFF TIMER once, the unit will automatically turn off at the same time everyday. MENU PROGRAM To set the off timer EXAMPLE: Turning off the TV at 11:30 PM. 1 Press MENU. Press or to select option. 5 Press press or to set the desired minute, then . MENU You can also select ON/OFF TIMER by pressing PROGRAM twice. ENTER SETUP CLOCK SET ON/OFF TIMER AUTO CLOCK STANDARD TIME DAYLIGHT SAVING TIME / / / / MENU ON TIMER 12 : 00AM CH 001 SUN-SAT OFF TIMER 11 : 30PM / / / CANCEL CANCEL / ENTER / MENU ON ENTER 6 ON Press or to select "SET". Now the OFF TIMER is set. 2 Press press or . to select "ON/OFF TIMER", then ENTER ON TIMER 12 : 00AM CH 001 SUN-SAT OFF TIMER 11 : 30PM / / / CANCEL SET ENTER CLOCK SET ON/OFF TIMER AUTO CLOCK STANDARD TIME DAYLIGHT SAVING TIME / / / MENU / ENTER / MENU 7 CANCEL CANCEL Press MENU repeatedly until the menu screen is cleared. MENU 3 4 Press . or to select "OFF TIMER", then press SETUP ENTER ON TIMER 12 : 00AM CH 001 SUN-SAT OFF TIMER 12 : 00AM / / / MENU Press press or to set the desired hour, then . Notes: · To cancel the OFF TIMER function: To cancel OFF TIMER, follow above steps 1~5, then press or button to select "CANCEL". Press the MENU button repeatedly until the menu screen is cleared. · To confirm the ON/OFF TIMER: Press the PROGRAM button twice to indicate the programs on the screen. ENTER ON TIMER 12 : 00AM CH 001 SUN-SAT OFF TIMER 11 : 00PM / / / CANCEL CANCEL / ENTER / MENU 30 5L00301C [E]p27-32 30 20/4/04, 16:14 Picture control adjustment/ Adjusting the picture preference Picture controls are factory preset but you can adjust them individually as follows: And also you can select four picture modes--Standard, Sports, Movie, and Memory--as described in the following table: CANCEL MENU ENTER Picture control adjustment Adjusting the picture preference 1 Press MENU, then press option. MENU or to select 1 Press MENU, then press option. MENU or to select SETUP LANGUAGE/ IDIOMA/LANGUE PICTURE AUDIO PICTURE PREFERENCE SETUP LANGUAGE/ IDIOMA/LANGUE PICTURE AUDIO PICTURE PREFERENCE TV operation ENTER ENTER / / / / MENU / / / / MENU 2 3 Press . or to select "PICTURE", then press 2 Press or to select "PICTURE PREFERENCE", then press . ENTER LANGUAGE/ IDIOMA/LANGUE PICTURE AUDIO PICTURE PREFERENCE ENTER LANGUAGE/ IDIOMA/LANGUE PICTURE AUDIO PICTURE PREFERENCE / / / MENU / / / MENU Press or to select the item you want to adjust, then press or to adjust the setting. 3 Press or to select the desired picture mode, then press ENTER. ENTER BRIGHTNESS CONTRAST COLOR TINT SHARPNESS 0 +32 0 0 0 ENTER PICTURE PREFERENCE STANDARD SPORTS MOVIE MEMORY / / / / CANCEL / MENU / / ENTER / MENU Selection BRIGHTNESS CONTRAST COLOR TINT SHARPNESS Pressing darker lower paler reddish softer lighter higher deeper greenish sharper Mode STANDARD SPORTS MOVIE MEMORY Picture quality Standard picture quality (factory-set) Bright and dynamic picture (factory-set) Movie-like picture setting (factory-set) Your personal preferences (set by you; see "Picture control adjustment" as left) Note: The CONTRAST default setting is set to maximum (+32) at the factory. 4 After your desired setting press MENU repeatedly until the menu screen is cleared. MENU 4 After your desired setting press MENU repeatedly until the menu screen is cleared. MENU SETUP SETUP 3 To return all adjustments to the factory preset levels Press CANCEL while making picture adjustments. 31 5L00301C [E]p27-32 31 20/4/04, 16:14 TV operation Sound control adjustment/ Stereo and Second Audio Program (SAP) Sound controls are factory preset but you can adjust them individually as follows: The unit is equipped with a feature known as multi-channel TV sound or MTS. MTS broadcasts greatly enhance TV viewing by bringing you programs with high fidelity stereo sound. MTS also provides an extra channel called the Second Audio Program or SAP which broadcasters can use to transmit a second language for bilingual transmission or for other purposes. AUDIO SELECT CANCEL MENU Sound control adjustment Listening to stereo sound When the TV is turned on or a channel selection is made, make certain the "STEREO" appears on the screen. This means that Stereo broadcasting is available. You can enjoy stereo sound from the left and right speakers. · When mono broadcasting is received, no indication is displayed. · If the broadcast signal is not strong enough or clear stereo sound is not available, press AUDIO SELECT to change to mono sound. · This unit selects the playback tape speed SP or SLP automatically. · When you select the TV/VCR mode during DVD playback, DVD playback will change to the still mode, and after 5 minutes it will change to the resuming playback mode automatically. 34 5L00301C [E]p33-37 34 20/4/04, 16:14 Special playback CM SKIP REV SLOW PLAY FWD PAUSE/STILL D. TRACKING TRK +/­ Picture search Reverse picture search function Press REV once or twice during the playback. Forward picture search function Press FWD once or twice during the playback. SPEED SEARCH TIMES TAPE SPEED SP (Standard Play) SLP (Super Long Play) PICTURE SEARCH SPEED PRESS ONCE PRESS TWICE 3X 9X 5X 15 X Digital tracking controls When a tape is played, the Digital Auto Tracking system automatically adjusts the tracking to obtain the best possible picture. If noise bars appear during playback, adjust the tracking manually as follows: · Press TRK + / ­ to obtain the best possible picture. "MANUAL TRACK" will appear for 4 seconds on the screen. To resume automatic tracking, press D. TRACKING. "DIGITAL TRACK" will appear for 4 seconds on the screen. Playback (VCR) MANUAL TRACK DIGITAL TRACK Still picture Notes: · "SP" is more appropriate as less noise appeared during search Press PAUSE/STILL during playback. and still playback for tape recorded in SP. To resume normal playback, press PLAY or PAUSE/STILL. · The audio output is muted during SPEED SEARCH, STILL, If the still picture jitters excessively, press TRK + / ­ to FRAME ADVANCE and SLOW MOTION. [. . . ] During this period TACP will replace a defective part without charge to you, except that if a defective part is replaced after ninety (90) days from the date of original retail purchase you pay labor charges involved in the replacement. You must also deliver the entire product to a TACP Authorized Service Station. You are responsible for all transportation for the set to and from the Service Station. Limited Two (2) Year Warranty of Picture Tube TACP further warrants the picture tube in this product against defects in materials or workmanship for a period of two (2) years after the date of original retail purchase. During this period, TACP will replace a defective picture tube without charge to you except that if a defective picture tube is replaced after ninety (90) days from the date of the original retail purchase, you pay labor charges involved in the replacement. [. . . ]