User manual TOSHIBA TP61G60

[. . . ] TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. FCC NOTICE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] The program can still be viewed if you press MUTE and then enter your password to temporarily bypass the block. Note: The V-Chip function is activated only on programs that have the rating signal. 27 J5X00301A [E] (P26-30) 27 16/3/06, 3:50 PM TV operation Picture control adjustment/ Adjusting the picture mode Picture controls are factory preset but you can adjust them individually as follows: And also you can select four picture modes--Standard, Sports, Movie, and Memory--as described in the following table: CANCEL /// MENU Picture control adjustment Adjusting the picture mode to select 1 2 Press MENU and then press "PICTURE". PICTURE PICTURE MODE or AUDIO SETUP V-CHIP 1 Press MENU and then press "PICTURE". PICTURE or to select AUDIO SETUP V-CHIP SPORTS 25 50 25 00 25 :ADJUST PICTURE MODE BRIGHTNESS CONTRAST COLOR TINT SHARPNESS :SELECT SPORTS 25 50 25 00 25 :ADJUST BRIGHTNESS CONTRAST COLOR TINT SHARPNESS :SELECT Press or to select the item you want to adjust, then press or to adjust the setting. PICTURE PICTURE MODE BRIGHTNESS CONTRAST COLOR TINT SHARPNESS :SELECT SPORTS 25 50 25 00 25 :ADJUST AUDIO SETUP V- CHIP 2 Press or or to select "MODE", then press to select the desired picture mode. PICTURE PICTURE AUDIO SETUP V- CHIP SPORTS MODE SPORTS/STANDARD/MOVIE/MEMORY 25 BRIGHTNESS 50 CONTRAST 25 COLOR 00 TINT 25 SHARPNESS :SELECT :ADJUST Selection BRIGHTNESS CONTRAST COLOR TINT SHARPNESS Pressing darker lower paler reddish softer lighter higher deeper greenish sharper Mode SPORTS STANDARD MOVIE MEMORY Picture quality Bright and dynamic picture (factory-set) Standard picture quality (factory-set) Movie-like picture setting (factory-set) Your personal preferences (set by you; see "Picture control adjustment" as left) Note: The CONTRAST default setting is set to maximum (+50) at the factory. 3 Press CANCEL to clear the menu screen. CANCEL 3 Press CANCEL to clear the menu screen. CANCEL I To return all adjustments to the factory preset levels Press or to select "RESET", then press . Note: You cannot select "MODE" in the Game mode. 28 J5X00301A [E] (P26-30) 28 16/3/06, 3:50 PM Selecting the color temperature CANCEL /// MENU Selecting the color temperature 1 Press MENU and then press "PICTURE" PICTURE PICTURE or to select AUDIO SETUP V-CHIP TV operation MODE BRIGHTNESS CONTRAST COLOR TINT SHARPNESS :SELECT SPORTS 25 50 25 0 25 :ADJUST 2 Press or to select "COLOR TEMPERATURE". PICTURE PICTURE AUDIO SETUP V- CHIP COLOR TEMPERATURE RESET COOL C O O L / M E D I U M / WA R M :SELECT :ADJUST 3 Press mode. or to select the desired color PICTURE PICTURE AUDIO SETUP V-CHIP COLOR TEMPERATURE RESET WARM COOL/MEDIUM/WARM :SELECT :ADJUST Mode COOL MEDIUM WARM Picture quality Bluish Neutral Reddish 4 Press CANCEL to clear the menu screen. CANCEL Note: You cannot select "COLOR TEMPERATURE" in the Game mode. 29 J5X00301A [E] (P26-30) 29 16/3/06, 3:51 PM TV operation Sound control adjustment/ Stereo and Second Audio Program (SAP) Sound controls are factory preset but you can adjust them individually as follows: The TV/DVD is equipped with a feature known as multi-channel TV sound or MTS. MTS broadcasts greatly enhance TV viewing by bringing you programs with high fidelity stereo sound. MTS also provides an extra channel called the Second Audio Program or SAP which broadcasters can use to transmit a second language for bilingual transmission or for other purposes. CANCEL /// MENU Sound control adjustment Listening to stereo sound to select Repeat step 1 in "Sound control adjustment" on left, then press or to select "MTS". Then press or to select "STR". When the TV is turned on or a channel selection is made, the "STEREO" will appear on the screen. This means that Stereo broadcasting is available. You can enjoy stereo sound from the left and right speakers. · When mono broadcasting is received, no indication is displayed. · If the broadcast signal is not strong enough or clear stereo sound is not available, select "MONO". The noise may be eliminated. 1 2 Press MENU and then press "AUDIO" PICTURE AUDIO MTS BASS TREBLE BALANCE SURROUND RESET or AUDIO SETUP V-CHIP STEREO 25 25 00 OFF :SELECT :ADJUST Press or to select the item you want to adjust, then press or to adjust the setting. PICTURE AUDIO MTS BASS TREBLE BALANCE SURROUND RESET STEREO 25 25 00 OFF AUDIO SETUP V-CHIP STEREO :SELECT :ADJUST MTS Press or to select "STR" (STEREO), "SAP" or "MONO". : You can use this function with DVD video discs. VCD : You can use this function with Video CDs. CD : You can use this function with Audio CDs and CD-R/RW CDs. DVD VCD CD Basic playback To remove the disc Press EJECT. Remove the disc after the disc comes out. To pause playback (still mode) Press PAUSE during playback. To resume normal playback, press PLAY. · The sound is muted during still mode. To stop playback Press STOP. Notes: · If a non-compatible disc is loaded, "Incorrect Disc", "Region Code Error" or "Parental Error" will appear on the TV screen according to the type of loaded disc. In this case, check your disc again (see pages 8 and 50). · Some discs may take a minute or so to start playback. · When you set a single-faced disc label downwards (ie. the wrong way up), "Reading" will appear on the display for a few minutes and then "Incorrect Disc" will continue to be displayed. · Some discs may not work the resuming facility. · Resuming cannot function when you play a PBC-featured Video CD while the PBC is on. [. . . ] ("TACP") makes the following limited warranties to original consumers in the United States. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS LCD TV/DVD COMBINATION AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE. LCD TV/DVD COMBINATIONS PURCHASED IN THE U. S. A. AND USED ANYWHERE OUTSIDE OF THE U. S. A. , INCLUDING, WITHOUT LIMITATION, CANADA AND MEXICO, ARE NOT COVERED BY THESE WARRANTIES. LCD TV/DVD COMBINATIONS PURCHASED ANYWHERE OUTSIDE OF THE U. S. A. , INCLUDING, WITHOUT LIMITATION, CANADA AND MEXICO, AND USED IN THE U. S. A. , ARE NOT COVERED BY THESE WARRANTIES. Limited One (1) Year Warranty on Parts and Labor TACP warrants this LCD TV/DVD Combination and its parts against defects in materials or workmanship for a period of one (1) year after the date of original retail purchase. [. . . ]