User manual TOSHIBA W804

[. . . ] Video Cassette Recorder W-808 W-804 OWNER'S MANUAL REV FF PLAY POWER EJECT PROG. TV STOP REC PAUSE/STILL This publication is printed on recycled paper 70971856 SAFETY PRECAUTIONS The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. [. . . ] Select a channel to record with CHANNEL on the VCR, or CH/TRK or number buttons on the remote control. POWER SLP VCR CH 2 3 PLAY/x2 REW ENTER STOP FF 4 6 5 2 POWER SLP VCR VCR Plus+ DNR A. SELECT POWER REMAIN COUNTER CH DOWN COUNT RESET CH UP If you see "L1" or "L2" in the VCR display, press I. SELECT so that the channel number appears. · If you record cable channels via the cable box, make the output channel number of the cable box or "L1" appear, depending on your connection. (See pages 11 ­ 13. ) To record from other connected equipment In step 3, press I. SELECT to switch the display as follows: LI: To record via the LINE IN 1 jacks or the LINE IN 1 SVIDEO jack on the rear panel. L2: To record via the LINE IN 2 jacks or LINE IN 2 S-VIDEO jack on the front panel. S-VIDEO jack will be selected if both LINE IN and S-VIDEO jacks are connected. 4 Press SP/SLP to select the recording tape speed. POWER SLP VCR CH SP: Suitable for general recording with better picture and sound quality. SLP: Suitable for tripling recording time, but with less picture and sound quality than using the SP tape speed. 5 6 7 8 Press PROG. Select "SET UP" using FF or REW, and press ENTER. Press STOP repeatedly to go to screen 2 of SET UP page to select "S-VHS REC", and set to "ON" using REW or FF. " " indicator will appear on VCR display when "ON" is selected. Press REC on the VCR, or simultaneously press both REC on the remote control. The S-VHS recording mode will be automatically selected. Press STOP to stop recording. REC TIMER POWER SLP VCR REC CH 9 Note If VHS cassette is loaded, the VHS recording mode will be automatically selected regardless of the "S-VHS REC" setting. 28 To Record in S-VHS ET Mode This VCR is equipped with Super VHS ET that makes it possible to record with S-VHS picture quality on VHS cassettes. 1 4 7 2 5 8 0 3 6 9 100 3 I. SELECT 1 2 3 Load a cassette with the safety tab attached. Press TV/VCR so that the "VCR" indicator appears in the VCR display. Select a channel to record with CHANNEL on the VCR, or CH/TRK or number buttons on the remote control. POWER SLP VCR RECORDING CH PLAY/x2 REW ENTER STOP FF 4 6 5 2 POWER SLP VCR VCR Plus+ DNR A. SELECT POWER REMAIN COUNTER CH DOWN COUNT RESET CH UP If you see "L1" or "L2" in the VCR display, press I. SELECT so that the channel number appears. · If you record cable channels via the cable box, make the output channel number of the cable box or "L1" appear, depending on your connection. (See pages 11 ­ 13. ) 4 Press SP/SLP to select the recording tape speed. POWER SLP VCR CH SP: Suitable for general recording with better picture and sound quality. SLP: Suitable for tripling recording time, but with less picture and sound quality than using the SP tape speed. 5 6 7 8 Press PROG. Select "SET UP" using FF or REW, and press ENTER. Press STOP repeatedly to go to screen 2 of SET UP page to select "S-VHS ET", and set to "ON" using REW or FF. "S-ET" indicator will appear on VCR display when "ON" is selected. Press REC on the VCR, or simultaneously press both REC on the remote control. The S-VHS ET recording mode will be automatically selected. REC TIMER POWER SLP VCR REC CH 9 Press STOP to stop recording. Note S-VHS ET does not work with S-VHS tapes. 29 RECORDING Timer Program Recording The programmable timer allows you to record up to 6 different programs over one month. Preparation · Select the video channel (3 or 4) or video input mode on the TV. [. . . ] (5) Labor service charges for set installation. Set up, adjustment of customer controls and installation of repair or antenna systems are not covered by this warranty. Reception problems caused by inadequate antenna systems are your responsibility. (6) Warranties extend only to defects in materials or workmanship as limited above and do not extend to any product or parts which have been lost or discarded by you or to damage to products or parts caused by misuse, accident, damage caused by Acts of God, such as lightning or fluctuations in electric power, improper installation, improper maintenance or use in violation of instructions furnished by us; or to units which have been altered or modified without authorization of TACP/THI or to damage to products or parts there of which have had the serial number removed, altered, defaced or rendered illegible. [. . . ]