User manual TOYOTA SPB26

[. . . ] SP20 Series HOME-USE SEWING MACHINE INSTRUCTION MANUAL · Read this manual carefully before use and always follow the instructions. · Keep the manual in a convenient place for easy reference. · If you give the sewing machine to someone else, also give them this instruction manual. Contents Before use · · · · · · · · · · · Important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 How to change the power plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Part names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] After checking that the thread has passed through the eye of the needle, release the needle threader lever while releasing the end of the thread. (The needle threader lever automatically returns to its storage position. ) If the needle is not threaded, return to step 3, and try threading the needle again. 7 Pull the loop in the thread that formed at the back of the needle, and then pull about 15 cm of thread to the back of the sewing machine. 15cm 21 Sewing preparations · Pulling up the lower thread 1 Hold the end of the thread, turn the handwheel towards yourself for one full turn, and then stop when the needle is at its highest position. Handwheel Note: Always turn the handwheel towards yourself (in the direction of the arrow). If you turn it in the wrong direction it could tangle the thread. Note: If the thread is tight the lower thread will not come out, so hold the thread loosely. 2 Pull up the upper thread and the loop of the lower thread will come out. Pull out this lower thread. Upper thread Lower thread 3 Align the upper thread and lower thread, and thread through the groove of the presser foot. Pull back about 15 cm. 15cm 22 Sewing preparations · Application of each stitch pattern Stitch length dial The stitch is selected according to the combination of settings selected on the pattern selection dial and the Stitch length dial. For details on selecting stitches, refer to " Sewing". Stitch length for the stitch number 1 through 15 on the pattern selection dial can be adjusted from 0 to 4 mm by stitch length dial. Stitch settings A through S on the pattern selection dial have a fixed stitch length of 3 mm. Caution Pattern selection dial Do not turn the pattern selection dial or stitch length dial while operating the machine. Doing so could cause injuries. · Stitches L through S can be sewn only with model XXX34. · The model name is indicated beside "MODEL" in the model label on the back of the sewing machine. (MODEL SP **) Application MODEL model 34 model 26 Attention Stitch list Pattern selection dial No. Stitch length dial (recommend setting) Stitch 1 2 3 4 5 1 0-4 (0. 4~1) 2 3 Buttonhole 4 0-4 (1~4) 0-4 (1~4) 0-4 (2~4) Straight stitch (left side) Straight stitch (center) Zipper insertion Blind hem stitch Decorative stitch Stretch fabric blind hem stitch Mending stitch Thin fabric overcasting Decorative stitch Overcasting Decorative stitch Decorative stitch Zigzag stitch (medium) Zigzag stitch (large) Overcasting 6 7 8 9 10 11 12 13 14 15 0-4 (1~2) 0-4 (1~4) 0-4 (1~2) 0-4 (1~2) 0-4 (1~2) 0-4 (1~2) 0-4 (1~2) 0-4 (0. 5~2) 0-4 (1~4) 23 Pattern selection dial No. Stitch length dial Stitch Application MODEL model 34 model 26 A B C D E F G H I J K A-K A-K A-K A-K A-K A-K A-K A-K A-K A-K A-K Reinforced straight stitch (left side) Reinforced straight stitch (center) Decorative stitch Double overlock Decorative stitch Decorative stitch Decorative stitch Decorative stitch Overlock Decorative stitch Overlock Decorative stitch Reinforced zigzag stitch (medium) Reinforced zigzag stitch (large) Decorative stitch Decorative stitch Fagoting Appliqué Appliqué Decorative stitch Decorative stitch Decorative stitch - L M N O P Q R S 24 L-S L-S L-S L-S L-S L-S L-S L-S Sewing preparations · Changing the presser foot Caution Before changing the presser foot, remove the power plug from the outlet. Not doing so could cause an injury. Removal 1 Raise the presser foot lever. 2 Turn the handwheel towards yourself to raise the needle. Note: Never turn in the wrong direction. Handwheel Presser foot lever 3 Press the presser foot holder lever in the direction of the arrow to release the presser foot. Presser foot holder lever Presser foot 25 Installation 1 Position the presser foot pin directly below the groove in the presser foot holder. Presser foot holder Groove Presser foot pin 2 Lower the presser foot lever to attach the presser foot. Presser foot lever 26 Sewing preparations · Changing the needle Caution Before changing the needle, remove the power plug from the outlet. Be sure to dispose of broken needle in a safe manner. Not doing so could cause an injury. 1 2 Turn the handwheel towards yourself to raise the point of the needle higher than the needle plate. Hold the needle in one hand, loosen the needle clamp screw with the screw driver for the needle plate, and remove the needle. Note: Do not remove the needle clamp screw. Loosen the needle clamp screw to remove the needle. Screw driver for the needle plate Needle clamp screw 3 Face the flat surface of the needle to the rear and insert until it makes contact with the pin. Firmly tighten the needle clamp screw with the screw driver for the needle plate. Flat surface Pin Correct needle selection Good needle If a faulty needle is used, not only could it impair the sewing performance, but it could also damage the needle plate or hook, or break the needle. [. . . ] No grounding means are provided on a double-insulated product nor should a means for grounding be added to the product. Servicing a double-insulated product requires extreme care and should only be done by qualified service personnel with knowledge of the system under his or her responsibility. Replacement parts for a doubleinsulated product must be identical to those parts in the product. The symbol is marked on the double-insulated product. Others · Safety precaution about the battery Warning If the alkaline solution from the battery get in the eyes or come into contact with the skin or clothes, rinse with a large quantity of clean water and consult a doctor immediately. [. . . ]