User manual TP-LINK TF-3239DL

[. . . ] Add: Fl. 3, Bldg. R1-B, High-Tech Industrial Park, Shennan Road, Shenzhen, China E-mail: support@tp-link. com Website: http://www. tp-link. com LINK/ACTIVE LED A red LED indicates if the 10 or 100Mbps STP/UTP has been link OK or not and is working or not. When the light is OFF, it indicates that the STP/UTP port has not been connected or link not OK; When the light is ON, it indicates that the STP/UTP port link OK. When the light is BLINKING, it indicates that the STP/UTP port is receiving data or transmitting data. TF-3239D/TF-3239DL 10/100M Fast Ethernet Adapter Chapter 2 Installation Card Installation To insert The Product into your computer, follow the steps list below. [. . . ] Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Thank you for purchasing TF-3239 series 10/100M Fast Ethernet Adapters. This guide is to provide the installation and usage of the Products for network installers or users. The Product complies with PCI 2. 1/2. 2 specification and supports half/full duplex feature which can double network speed. The Adapters support both 10Mbps and 100Mbps network speed, 100Base-TX operates on twisted pairs of Category 5 UTP and 10BaseT operates on Category 3, 4, 5 UTP. The Products use AutoNegotiation technology to detect the network speed. Extensive driver supports for including commonly used network operation system Netware, Win9x, Win2000, Windows NT, and TCP/IPare available. This manual is divided into two chapters and two appendices. The following summarizes the contents of the chapters and appendices. memory. It includes an interface for a boot ROM and can be used in diskless workstations, providing maximum network security and ease of management(Exclude TF-3239DL). They also support full-duplex operation, making possible 200Mbps of bandwidth at no additional cost. The Adapters support both 10Mbps and 100Mbps network speed, 100Base-TX operate on twisted pairs of Category 5 UTP and 10Base-T operate on Category 3, 4, 5 UTP. The Adapters use Auto-Negotiation technology to detect the network speed. Extensive driver supports for including commonly used network operation system Netware, Win9x, Win2000, Windows NT, and TCP/IP are available. [. . . ] There may be a remote risk of electric shock from lightning. Chapter 1 Introduction Hardware Overview TF-3239 series Adapters are highly integrated and cost-effective single-chip Fast Ethernet Adapter that provides 32-bit performance, PCI bus master capability, and full compliance with IEEE 802. 3u 100Base-TX specifications and IEEE 802. 3x Full Duplex Flow Control. They also support ACPI, PCI power management for modern operating systems that is capable of Operating System Directed Power Management (OSPM) to achieve the most efficient power management. The Adapters keep network maintenance cost low and eliminate usage barriers. [. . . ]