User manual TP-LINK TL-SC3130G

[. . . ] Rev: 1. 0. 0 1910010185 COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO. , LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO. , LTD. [. . . ] The UPnP feature allows the devices, such as Internet computers, to access the local host resources or devices as needed. UPnP devices can be automatically discovered by the UPnP service application on the LAN. 30 HTTP port: Enter the HTTP port number and the default HTTP port is 80. SSL port: Enter the SSL port number and the default SSL port is 443. MPEG4 viewer port: Enter the MPEG4 viewer port number and the default MPEG4 viewer port is 8090. MPEG4 viewer port (SSL): Enter the MPEG4 SSL viewer port and the default MPEG4 viewer port number is 8091. MJPEG viewer port: Enter the MJPEG viewer port number and default MJPEG viewer port is 8070. MJPEG viewer port (SSL): Enter the MPEG4 SSL viewer port and default MJPEG viewer port number is 8071. MPEG4 RTSP port: Enter the MPEG4 RTSP port, default value is 8050 for computer view, 8030 for mobile view. Note: UPnP (Universal Plug and Play): UPnP is a set of computer network protocol. It allows devices to connect seamlessly and simplify the implementation of networks at home and corporate environments. The device supports UPnP which is enabled by default. The device will be automatically detected and a new icon will be added to "My Network Place" if it also enables on your computer. It provides Port Forwarding for opening a port in a router or firewall in a private network in order to let a party from the outside world contact a inside user. 31 6. 3. 5 Bonjour Bonjour, also known as zero-configuration networking, enables automatic discovery of computers, devices, and services on IP networks. Bonjour uses industry standard IP protocols to allow devices to automatically discover each other without the need to enter IP addresses or configure DNS servers. Device Name: Enter Device Name to your needs. Note: How to use Bonjour in your Windows Browser UI?Please check the link below: http://www. apple. com/support/downloads/bonjourforwindows. html 6. 3. 6 IP Notification When network notify type is set to "ON", you can send an e-mail notification of the completion of the network setting. 32 Notify Type: You can select the notify type among DHCP, Static IP, and PPPoE. SMTP Server Name: Type the SMTP server name up to 64 characters, or the IP address of the SMTP server. SMTP Server Port: You can set port number from 1~65535 according to your mail server. Checking SSL box if the mail server you use has security restriction. Note: If you use g-mail as your mail server, you should set 587 as your port number and check SSL box. Authentication: Select the authentication required when you send an email. Off: Select this if no authentication is necessary when an email is sent. [. . . ] Start time, End time: Specify the Start time and the End time. Use the same time schedule every day: When this is checked, the Start time and End time set to Mon (Monday) are applied to all days. In this case, the Start time and End time of the other days than Mon (Monday) cannot be input. 7. 5 Motion Detection There are three Motion Detection functions as sensors to set for different detecting zones. Each one 56 has Threshold and Sensitivity inputs which you can adjust to specific zone sequentially. [. . . ]