User manual TP-LINK TL-WA890EA

[. . . ] TL-WA890EA N600 Universal Dual Band WiFi Entertainment Adapter with 4 Ports REV. :1. 0. 0 1910010832 COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO. , LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO. , LTD. [. . . ] In this situation the device will automatically configure the IP parameters appropriate to your need. If you are not familiar with the setting items in this page, it's strongly recommended to keep the provided default values, otherwise may result in lower wireless network performance or even can't work. If you choose Static IP, the domain name log in function won't work, and you have to use the IP you set to log in the Entertainment Adapter's web based utility. 3. 13 TL-WA890EA N600 Universal Dual Band WiFi Entertainment Adapter with 4 Ports 4. 4. 2 Wireless Settings Selecting Advanced > Wireless Settings will enable you to configure the basic settings for your wireless network on the screen below (Figure 4-9). Figure 4-9 Wireless Settings         Main Router/AP Wi-Fi Network Name - The name of the wirless network this device is going to connect to. MAC Address of Main Router/AP - The physical MAC address of the Main Router/AP this device is going to connect to. Band - The wireless band that the root access point or wireless router is working in. Wireless Security Type - The wireless security type of the existing wireless network. Encryption - The encryption of the existing wireless network. It is used when the wireless security type is WPA-PSK or WPA2-PSK. WEP Index - The WEP index is only used when the wireless security type is WEP (ASCII) or WEP (Hexadecimal). WEP Auth Type - The authorization type of WEP. It is only used when the wireless security type is WEP (ASCII) or WEP (Hexadecimal). Wireless Password - The wireless password of the existing wireless network. If the Wireless Security Type is WPA-PSK or WPA2-PSK, the length of this field should be between 8 and 63 characters which are case-sensitive. If the Wireless Security Type is WEP (ASCII), the length should be 5 or 13 characters. If the Wireless Security Type is WEP (Hexadecimal), the length should be 10 or 26 digits. 4. 4. 3 Wireless Advanced Selecting Advanced > Wireless Advanced will allow you to do some advanced settings for the device in the following screen shown in Figure 4-10. 14 TL-WA890EA N600 Universal Dual Band WiFi Entertainment Adapter with 4 Ports Figure 4-10 Wireless Advanced         Main Router/AP Wi-Fi Network Name - The name of the wirless network this device is going to connect to. MAC Address of Main Router/AP - The physical MAC address of the Main Router/AP this device is going to connect to. Band - The wireless band that the root access point or wireless router is working in. Wireless Security Type - The wireless security type of the existing wireless network. Encryption - The encryption of the existing wireless network. It is used when the wireless security type is WPA-PSK or WPA2-PSK. WEP Index - The WEP index is only used when the wireless security type is WEP(ASCII) or WEP(Hexadecimal). WEP Auth Type - The authorization type of WEP. [. . . ] DoS (Denial of Service) - A hacker attack designed to prevent your computer or network from operating or communicating. DSL (Digital Subscriber Line) - A technology that allows data to be sent or received over existing traditional phone lines. ISP (Internet Service Provider) - A company that provides access to the Internet. MTU (Maximum Transmission Unit) - The size in bytes of the largest packet that can be transmitted. [. . . ]