User manual TRANSCEND TS0MFLRD6E

[. . . ] 8 To Remove in Linux. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Boot-up Function To Boot-up with Pheonix or Award BIOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 To Boot-up with AMI BIOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Hardware setup is complete. To Use the Internal 6-in-1 Card Reader After the driver installation and hardware setup are complete, you can power on the computer and start to use Internal 6-in-1 Card Reader. To Use with Windows 98SE, Me and 2000 1. The New Hardware Found window appears (the first time you power on the computer after installing the Internal 6-in-1 Card Reader. ) 6 2. Four Removable Disk drives with newly assigned drive letters appear in My Computer. The Internal 6-in-1 Card Reader is ready for use. To Use with Windows XP 1. The Found New Hardware status message appears (the first time you power on the computer after installing the Internal 6-in-1 Card Reader. ) 2. Four Removable Disk drives with newly assigned drive letters appear in My Computer. The Internal 6-in-1 Card Reader is ready for use. 7 To Use with Linux Kernel 2. 4 or Later The Internal 6-in-1 Card Reader is a driver-free device for Linux kernel 2. 4 or later. Just follow the procedures below to mount and use it. Power on the computer and insert a memory card into the Internal 6-in-1 Card Reader. Create a directory for the Internal 6-in-1 Card Reader. Example: mount ­a ­t msdos /dev/sda1 /mnt/CardReader No matter how many memory cards are inserted into the Internal 6-in-1 Card Reader, only the slot with first inserted memory card can be mounted. To Safely Remove Memory Cards To Remove in Windows Make sure that the LED is not blinking (no data are being transmitted). You can then safely remove the memory card. WARNING: Removal of a memory card directly may cause the system to halt. To Remove in Linux Unmount the device from the Linux environment. You can then safely remove the memory card. Example: umount /mnt/CardReader WARNING: Never remove or insert a memory card while data are being transmitted. To avoid improper shutdown, open the transmitted file from its new location to ensure transmission has been completed. 8 Boot-up Function The CompactFlash slot of the Internal 6-in-1 Card Reader can be configured as a bootable drive. To enable the Boot-Up function, your motherboard must support USB boot-up devices. Upon completion of the appropriate procedure for your BIOS as described below, a CompactFlash card can be used to boot up your computer. To Boot-up with Pheonix or Award BIOS 1. Power on your system and follow the on-screen instructions to enter BIOS or the CMOS setup utility. Refer to the owner's manual of your motherboard for details about the configuration program for your system. Enter STANDARD CMOS SETUP and select Advanced BIOS Features. 4. Select USB-ZIP for the "First Boot Device", then press ESC. 5. [. . . ] Transcend will inspect the product and make the determination as to whether the product is eligible for repair or replacement. The decision by Transcend regarding eligibility of the product for repair or replacement will be final and binding. Transcend reserves the right to provide a functionally equivalent refurbished replacement product. Limitations: This warranty does not apply to products that fail due to accident, abuse, mishandling, improper installation, alteration, acts of nature, improper usage, or problems with electrical power. [. . . ]