User manual TRENDNET TEW-311BRP

[. . . ] Wireless Router User's Manual V. 1. 2 Copyright This publication, including all photographs, illustrations and software, is protected under international copyright laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may be reproduced without written consent of the author. Disclaimer The information in this document is subject to change without notice. The manufacturer makes no representations or warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose. [. . . ] Delete: Select a filter profile from the table at the bottom of the list and click Delete to remove the profile. New: Click New to erase all fields and enter new information. IP Filter This screen enables you to define a minimum and maximum IP address range filter; all IP addresses falling in the range are not allowed Internet access. ­ 42 ­ The IP filter profiles are listed in the table at the bottom of the page. When selecting items in the table at the bottom, click anywhere in the item. The line is selected, and the fields automatically load the item's parameters, which you can edit: Note! Click anywhere in the line to select it. Enable: Click to enable or disable the IP address filter. Range Start: Type the minimum address for the IP range. IP addresses falling between this value and the Range End are not allowed to access the Internet. Range End: Type the minimum address for the IP range. IP addresses falling between this value and the Range Start are not allowed to access the Internet. Add: Click to add the IP range to the table at the bottom of the screen. Update: Click to update information for the range if you have selected a list item and have made changes. Delete: Select a list item and click Delete to remove the item from the list. Clear: Click Clear to erase all fields and enter new information. ­ 43 ­ Wireless Router user's manual Virtual Server This screen enables you to create a virtual server via the router. If the router is set as a virtual server, remote users requesting Web or FTP services through the WAN are directed to local servers in the LAN. The router redirects the request via the protocol and port numbers to the correct LAN server. The Virtual Sever profiles are listed in the table at the bottom of the page. When selecting items in the table at the bottom, click anywhere in the item. The line is selected, and the fields automatically load the item's parameters, which you can edit: Click anywhere in the line to select it. Note! Enable: Click to enable or disable the virtual server. Name: Type a descriptive name for the virtual server. Protocol: Select the protocol (TCP or UDP) you want to use for the virtual server. Private Port: Type the port number of the computer on the LAN that is being used to act as a virtual server. Public Port: Type the port number on the WAN that will be used to provide access to the virtual server. LAN Server: Type the LAN IP address that will be assigned to the virtual server. Add: Click to add the virtual server to the table at the bottom of the screen. [. . . ] Go to Start > Control Panel, and double-click "Add or Remove Programs" Click on "Add/Remove Windows components" Check "Certificate Services", and click "Next" to continue. ­ 97 ­ Wireless Router user's manual 5. Select "Enterprise root CA", and click "Next" to continue. 6. Enter the information that you want for your Certificate Service, and click "Next" to continue. ­ 98 ­ 7. 9. Go to Start > Program > Administrative Tools > Certificate Authority Right-click on the "Policy Setting", select "new" Select "Certificate to Issue" 10. Select "Authenticated Session" and "Smartcard Logon" by holding down to the Ctrl key, and click "OK" to continue. ­ 99 ­ Wireless Router user's manual 11. 12. Go to Start > Program > Administrative Tools > Active Directory Users and Computers. Right-click on domain, and select "Properties" to continue. 13. Select "Group Policy" tab and click "Properties" to continue. ­ 100 ­ 14. [. . . ]