User manual TRENDNET TEW-411BRP

[. . . ] TEW-411BRP Wireless 802. 11g AP Router User's Manual Version 1. 4 User's Guide 0 User's Guide 1 Copyright Statement No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, whether electronic, mechanical, photocopying, recording, or otherwise without the prior writing of the publisher. July. 2003 User's Guide 2 Contents 1. Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Safety Notification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] * Click Apply to save your settings. User's Guide 19 4. 5. SNMP SNMP: The SNMP INFO screen allows you to customize the Simple Network Management Protocol (SNMP) settings. SNMP is a popular network monitoring and management protocol. SNMPv2c Identification Contact To enable the SNMP support feature, select Enable. In the contact field, enter information for the Router. contact Unit Name In the Unit Name and Description field, enter the name of the Router. and Description Physical Location SNMP Community public In the Physical Location field, specify the area or location where the Router resides. You may change the SNMP Community's name from its default, public. Then configure the community's access as either Read-Only or Read-Write. You may change the SNMP Community's name from its default, public. Then configure the community's access as either Read-Only or Read-Write. private Click Apply to save your settings. User's Guide 20 4. 6. Status This screen displays the Wireless Router' current status and settings. s This page will auto re-flash every 5 seconds to keep most update information. Host Name: The Host Name is the name of the Router. Domain Name: The Domain Name is the name of the Router' domain. This entry is necessary for s some ISPs. WAN IP Release: Click the WAN IP Release button to delete the Router' current Internet IP address. s WAN IP Renew: Click the WAN IP Renew button to get a new Internet IP address for the Router. User's Guide 21 *Click the Refresh button to refresh the Router' status and settings. Advanced Wireless Wireless MAC Filters: This function allow administrator to have access control by enter MAC address of client stations. When Enable this function, two new options will show up. Depend on the filtering propose, it can be selected to Prevent or Permit. User's Guide 23 Click on Edit MAC Filter List to add the client stations MAC list. The table could store up to 40 different MAC addresses. Please follow the format that it required when an address is input. Authentication Type: Auto: Auto is the default authentication algorithm. It will change its authentication type automatically to fulfill client's requirement. Open System: Open System authentication is not required to be successful while a client may decline to authenticate with any particular other client. [. . . ] To learn more about this, click the Advanced tab and then the MAC Address Clone tab. Resolution: Connect the power adapter to your AP and plug it into the power outlet. Note: Only use the power adapter provided with your AP. Using any other adapter may damage your AP Router. [. . . ]