User manual TRENDNET TEW-655BR3G

[. . . ] 1 Copyright The contents of this publication may not be reproduced in any part or as a whole, stored, transcribed in an information retrieval system, translated into any language, or transmitted in any form or by any means, mechanical, magnetic, electronic, optical, photocopying, manual, or otherwise, without the prior written permission. Trademarks All products, company, brand names are trademarks or registered trademarks of their respective companies. They are used for identification purpose only. Specifications are subject to be changed without prior notice. [. . . ] 24 WPS: You can enable this function by selecting "Enable". WPS offers a safe and easy way to allow the wireless clients connected to your wireless network. AP PIN: You can press Generate New Pin to get an AP PIN. Config Mode: Select your config Mode from "Registrar" or "Enrollee". Config Status: It shows the status of your configuration. Config Method: You can select the Config Method here from "Pin Code" or "Push Button". WPS status: According to your setting, the status will show "Start Process" or "No used" Press "Wireless Clients List" and the list of wireless clients will be shown consequently. Change Password You can change the System Password here. We strongly recommend you to change the system password for security reason. Click on "Save" to store your settings or click "Undo" to give up the changes. 25 Forwarding Rules This section defines access restrictions, set up protocol and IP filters, create virtual server rules and special applications rules and DMZ (Demilitarized Zone). Please note that certain 3G network providers issues virtual WAN IP addresses causing these features not to work. Contact your 3G network service provider for additional information. Virtual Server This product's NAT firewall filters out unrecognized packets to protect your Intranet, so all hosts behind this product are invisible to the outside world. If you wish, you can make some of them accessible by enabling the Virtual Server Mapping. A virtual server is defined as a Service Port, and all requests to this port will be redirected to the computer specified by the Server IP. Virtual Server can work with Scheduling Rules, and give user more flexibility on Access control. For the details, please refer to Scheduling Rule. 26 For example, if you have an FTP server (port 21) at 192. 168. 123. 1, a Web server (port 80) at 192. 168. 123. 2, and a VPN server at 192. 168. 123. 6, then you need to specify the following virtual server mapping table: Service Port Server IP Enable 21 80 1723 192. 168. 123. 1 192. 168. 123. 2 192. 168. 123. 6 V V V Click on "Save" to store your settings or click "Undo" to give up the changes. Special AP Some applications require multiple connections, like Internet games, Video conferencing, Internet telephony, etc. Because of the firewall function, these applications cannot work with a pure NAT router. The Special Applications feature allows some of these applications to work with this product. [. . . ] Please contact the pointofpurchase for their return policies. TRENDnet shall not be responsible for any software, firmware, information, or memory data of customer contained in, stored on, or integrated with any products returned to TRENDnet pursuant to any warranty. There are no user serviceable parts inside the product. Do not remove or attempt to service the product by any unauthorized service center. [. . . ]