User manual TRENDNET TEW-658BRM

[. . . ] This Modem Router combines the functionality of an ADSL modem and Internet gateway in one. It allows you to access the Internet and share resources such as printers, scanners, and files, via a wireless connection or through one of the Ethernet ports. The various security features, such as WPS, WPA2, SPI, and NAT, protect your data and privacy online. The web-based utility allows you to configure your Modem Router easily. Features · · · · · · · · · · · · · · · Compliant with ADSL G. dmt (G. 992. 1), G. lite (G. 992. 2) standards Compliant with ADSL2 G. dmt. bis (G. 992. 3) and ADSL2 + G. 992. 5 standards Up to Up to 24Mbps downstream, 1. 2Mbps upstream with ADSL2+ service IEEE 802. 11b/g/n infrastructure operating modes Supports TR069 remote management Supports web-based configuration Supports Command Line Interface (CLI) via Telnet Supports NAT, DHCP Supports VLAN and QoS Supports firewall protection Supports up to 8 permanent virtual circuits (PVC) Supports Wi-Fi Multimedia (WMM) Supports Wi-Fi Protected Setup (WPS) for easy connection Supports wireless data encryption with 64/128-bit WEP standard Supports enhance security for WPA-TKIP, WPA2-AES, WPA, and WPA2 Package Contents Check if your package contains the following items. [. . . ] The table displays the virtual servers on your network. To edit an entry, click the corresponding icon. To delete an entry, click the corresponding button. To add virtual servers, click the Add button. The Virtual Server Config screen is displayed. Virtual Server -- Check this box to enable the virtual server function. Rule Name -- Enter a rule name or select an application name from the drop-down list on the right, then click the << button. If you select a predefined application name, the Public Port, Private Port, and Protocol Type are automatically configured. DSL Interface -- Select a DSL interface from the drop-down list. This is the port seen from the WAN side. This is the port being used by applications within your local network. NOTE: The public and private ports are usually the same. Protocol Type -- Select the protocol from the drop-down list. IP Address -- Enter the local network IP address of the system hosting the server. Time Schedule -- Select a schedule when to use the virtual server or click the New Time Schedule button to create a new schedule. Click the Apply button to save your changes or click the Cancel button to discard your changes. Port Trigger This page displays the port trigger settings on your network. Port triggering is a type of port forwarding where outgoing data from specific ports are sent to specific incoming ports. To access the Port Trigger page, click Advanced > NAT > Port Trigger or click the Port Trigger button. The table displays the port triggers on your network. To edit an entry, click the corresponding icon. To delete an entry, click the corresponding button. To add port triggers, click the Add button. The Port Trigger Config screen is displayed. Port Trigger -- Check this box to enable port triggering. Use Interface -- Select a DSL interface from the drop-down list. Trigger Port -- Enter the port that will trigger the device to open ports for incoming data. [. . . ] TRENDnet does not issue refunds or credit. Please contact the point-of-purchase for their return policies. TRENDnet shall not be responsible for any software, firmware, information, or memory data of customer contained in, stored on, or integrated with any products returned to TRENDnet pursuant to any warranty. There are no user serviceable parts inside the product. [. . . ]