User manual TRENDNET TFC-2000MSC QUICK INSTALLATION GUIDE

[. . . ] Connect the fiber cable to the Fiber Converters. 2. Connect an RJ-45 Ethernet cable from the Ethernet port on the fiber converters to an Ethernet port on your switch (e. g TE100-S24R or TEG-S240TX). 3. Connect the power adapter to the back of the fiber converter. Note: ­ Cabling: Multi-Mode Optic Cable: TFC-210MST, TFC-210MSC, TFC-2000MSC Single-Mode Optic Cable: TFC-210S30, TFC-210S50, TFC-2000S30, TFC-2000S50 Single Strand Optic Cable for TFC-210S20D3/D5, TFC-210S10D3/D5 ­ The TX and RX cables must be reversed on the opposing Fiber connection. ­ The TFC-210S20D3 must be paired with the TFC-210S20D5. [. . . ] Attach the mounting brackets to the Chassis's front panel (one on each side), and secure them with the provided screws. Carefully position the Chassis onto the rack. Align the bracket to the screw holes on the rack, then use the screws provided with the equipment rack to mount the Chassis. 7 English Connecting the Power 1. Connect the supplied power cord to the back of the Chassis. Connect the power cord into a power outlet. Flip the switch to the ON position to power up the Chassis. DIP Switches Switch 1: ON: TX Full Duplex Mode OFF: TX Auto-Negotiation Switch 2: ON: FX Half Duplex OFF: FX Full Duplex Switch 3: ON: LLCF Enable OFF: LLCF Disable Switch 4: ON: Pure Mode OFF: Switch Mode Switch 1: ON: TX LLCF Enable OFF: TX LLCF (Disable) Switch 2: ON: Fiber LLCF Enable OFF: Fiber LLCF (Disable) TFC-210 series TFC-2000 series *After changing the DIP Switch settings, power cycle the Fiber Converter. ** LLCF stands for Link Loss Carry Forward. 8 English LLCF Function LLCF allows the network administrator to quickly troubleshoot the network connection based on the LEDs on the Fiber Converters. When the TX port link is down, the converter will force the fiber port link to shutdown. When the fiber port link is down, the converter will force the TX port link to shutdown. LLCF (Link Loss Carry Forward) Diagram Cable 2 Cable 3 Cable 1 Media Converter 1 Media Converter 2 Cable 4 Copper Cable Fiber Cable Below are examples on how to read the LLCF Function Table: Example 1: If LLCF is enabled on Fiber Converter 1 and disable on Media Converter 2, when Cable 1 link is down, Fiber Converter 1's Copper and Fiber LED and Fiber Converter 2's Fiber LED will shut off. Fiber Converter 2's Copper LED remains on. Example 2: If LLCF is disabled on both Fiber Converters, when Cable 4 link is down, Fiber Converter 1's Copper and Fiber LED and Fiber Converter 2's Fiber LED remains on. Fiber Converter 2's Copper LED will shut off. 9 LLCF (Link Loss Carry Forward) Function Table Media Converter 1 Copper LED Media Converter 1 LLCF Enable Media Converter 2 LLCF Enable Cable 1 Link Down Cable 2 Link Down Cable 3 Link Down Cable 4 Link Down Cable 1 Link Down Cable 2 Link Down Cable 3 Link Down Cable 4 Link Down Cable 1 Link Down Cable 2 Link Down Cable 3 Link Down Cable 4 Link Down Cable 1 Link Down Cable 2 Link Down Cable 3 Link Down Cable 4 Link Down OFF OFF OFF OFF OFF OFF OFF ON OFF ON ON ON OFF ON ON ON Fiber LED OFF OFF OFF OFF OFF OFF OFF ON ON OFF OFF OFF ON OFF OFF ON Media Converter 2 Copper LED OFF OFF OFF OFF ON ON ON OFF ON OFF OFF OFF ON ON ON OFF Fiber LED OFF OFF OFF OFF OFF OFF OFF ON ON OFF OFF OFF ON OFF OFF ON Media Converter 1 LLCF Enable Media Converter 2 LLCF Disable Media Converter 1 LLCF Disable Media Converter 2 LLCF Enable Media Converter 1 LLCF Disable Media Converter 2 LLCF Disable 10 Specifications Fiber Converters TFC-210 series: IEEE 802. 3 10Base-T IEEE 802. 3u 100Base-TX & 100Base-FX TFC-2000 series: 1000Base-T, 1000Base-SX/LX, IEEE 802. 3ab/ 802. 3z TFC-210 series: Power; 100Mbps, Full Duplex/ Collision, Link/Activity LED Indicators: TFC-2000 series: Power; 1000Mbps, Full Duplex/ Collision, Link/Activity TFC-210 series: 10Base-T ­ UTP/STP Cat. 3, 4, 5 100Base-TX ­ UTP/STP Cat 5 100Base-FX ­ Multi-Mode ­ 62. 5/125ìm or 50/125ìm Multi-Mode Fiber Optic Cable 100Base-FX ­ Single-Mode ­ 9/125ìm Single-Mode Fiber Optic Cable Cable : TFC-2000 series: 1000Base-T ­ UTP/STP: Cat. 6 1000Base-SX­ Multi-Mode ­ 50/125ìm or 62. 5/125ìm Multi-Mode Fiber Optic Cable 1000Base-LX­ Single-Mode ­ 9/125ìm Single-Mode Fiber Optic Cable 85mm × 125mm × 25mm (W × D × H) Around 300 g (10 oz. ) 9VDC, 700mA External Power Adapter Operating: 0°C ~ 40°C (32°F ~ 104°F) Storage: -25°C ~ 70°C (-13°F ~ 158°F) 10 ~ 90%, non-condensing CE, FCC Standards: Dimensions: Weight: Power: Temperature: Humidity: Certifications: 11 Fiber Chassis Capacity: Material: Power: Power Consumption: Cooling: Dimensions: Weight: Temperature: Humidity: Certification: Ten bays for housing up to Ten media converters Metal AC 100~240V AC, 50/60Hz 90 Watts (Max) One Fan 440 mm × 266mm × 133 mm (W × D × H) Standard 19" Rack Mount Size (3U) 6. 4 kg (14. 2 lb. ) Operating: 0°C ~ 40°C (32°F ~ 104°F) Storage: -25°C ~ 70°C (-13°F ~ 158°F) 10 ~ 90%, non-condensing CE, FCC 12 Troubleshooting Q1: After connecting the Fiber Converter, the LEDs do not turn on. A1: First, check that the power outlet is receiving power. Second, make sure the power adapter is firmly connected to the Fiber Converter and the power outlet. Third, make sure the Ethernet and the Fiber cables are connected. Q2: All the LEDs are on, but I can't make a connection. A2: First, verify that you are using the proper fiber cable (e. g. multimode fiber cable for multi-mode converters; single-mode fiber cables for single-mode converters). Second, verify that the TX and RX cables have been reversed on the opposite Fiber connection. Third, power down the Fiber Converters and the switches. [. . . ] This warranty is voided if (i) the product has been modified or repaired by any unauthorized service center, (ii) the product was subject to accident, abuse, or improper use (iii) the product was subject to conditions more severe than those specified in the manual. Warranty service may be obtained by contacting TRENDnet office within the applicable warranty period for a Return Material Authorization (RMA) number, accompanied by a copy of the dated proof of the purchase. Products returned to TRENDnet must be pre-authorized by TRENDnet with RMA number marked on the outside of the package, and sent prepaid, insured and packaged appropriately for safe shipment. 14 WARRANTIES EXCLUSIVE: IF THE TRENDNET PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, THE CUSTOMER'S SOLE REMEDY SHALL BE, AT TRENDNET'S OPTION, REPAIR OR REPLACEMENT. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. [. . . ]