User manual TRENDNET TPL-102E

[. . . ] It is recommended that the same PC chosen for initial execution of this utility remain the PC of choice for subsequent network encryption updates. Network setup information is stored on the PC and is used to facilitate follow-on network encryption sessions. Before running this utility, make sure that a PLC device is properly installed and connected to your computer. RUNNING THE UTILITY To run the utility, double click the PLC Configuration Utility icon on your desktop. [. . . ] The Security dialog screen allows you to change this network password and set your own private password and apply it to the PLC device connected to the computer where the utility is running. Hit Restore Default button to restore the original network password "HomePlug" and apply it locally. Hit Set Local button to change the network password locally. Figure 4 Security Dialog screen Important: Your private network password must have between 4 and 24 characters. The password can include any letters of the alphabet, numbers or punctuation marks. Remember this password as it will be needed when adding other devices to the network later. Advanced dialog screen The Advanced dialog screen allows you to set up a network password remotely on other PLC devices through the powerline. Type your private network password into the Network Password text box. The other devices on the network with PLC capabilities will have a different password printed on either the box itself or in the documentation. Find the passwords for all devices you want to manage and type them one by one into the Device Password text box and hit Add. This will add the passwords to Remote Passwords text list box and set them to the currently defined Network Password. Note: The device must be present on the powerline in order for the password to be confirmed and added to the Remote Passwords list. Figure 5 Advanced dialog screen The Status indicates whether each device is successfully set to the Network Password. "OK" indicates success while "Fail" indicates a failure. Hit Set All to apply your private network password to all devices that are listed in the Remote Passwords text list box and to your local device connected to the computer where the utility is running as well. [. . . ] LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW TRENDWARE ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATE, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID, AT TRENDWARE'S OPTION. THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE. [. . . ]