User manual TRENDNET TPL-210AP

[. . . ] Regulatory notes and statements Wireless LAN, Health and Authorization for use Radio frequency electromagnetic energy is emitted from Wireless LAN devices. The energy levels of these emissions however are far less than the electromagnetic energy emissions from wireless devices such as mobile phones. Wireless LAN devices are safe for use frequency safety standards and recommendations. The use of Wireless LAN devices may be restricted in some situations or environments for example: ·On board airplanes, or ·In an explosive environment, or ·In case the interference risk to other devices or services is perceived or identified as harmful In case the policy regarding the use of Wireless LAN devices in specific organizations or environments (e. g. [. . . ] After entering the password the main page is shown, and the screen will display the device information. 8 Figure 8. Device information Configuration Menu When the main page appears, find the Configuration menu on the left side of the screen. Click on the setup item that you want to configure. There are six main options: IP Setting, Wireless, Access Control, HomePlug, System and Wizard as shown in the Configuration Menu screen. Figure 9. Configuration Menu 9 LAN Setting This setting enables users to configure the 85Mbps Powerline Wireless Access Point IP address & DHCP Server. Basic This page leads to set the 85Mbps Powerline Wireless Access Point properties, such as the host name, IP address, and subnet mask. Figure 10. The default IP address of this 85Mbps Powerline Wireless Access Point is 192. 168. 1. 200 with the subnet mask of 255. 255. 255. 0. Users can enter in a different IP Address, Subnet Mask and Gateway. Click "Apply" to save changes. User can also set the 85Mbps Powerline Wireless Access Point to obtain the IP from a DHCP server, but it is not recommended. Select the option "Obtain IP Automatically" and click "Apply" to save changes. Host Name: Type the host name in the text box. The default host name is "TRENDnet" IP Address: This is the IP address of the 85Mbps Powerline Wireless Access Point. The default IP address is 192. 168. 1. 200. Subnet Mask: This is the subnet mask of the 85Mbps Powerline Wireless Access Point in the text box. The default subnet mask is 255. 255. 255. 0. Gateway: Enter the gateway address of the network. Contact the ISP or network administrator for this information. DNS Server: Enter the DNS IP address of the network. Contact the ISP or network administrator for this information. 10 DHCP Figure 11. DHCP Server: Enabling DHCP server allows the 85Mbps Powerline Wireless Access Point to automatically assign IP addresses to devices connecting to the LAN. DHCP Server Start IP: Enter an IP address to serve as the starting IP address that the DHCP server will use to assign IP addresses to all LAN devices connected to the 85Mbps Powerline Wireless Access Point. DHCP Server End IP: Enter an IP address to serve as the ending IP address that the DHCP server will use to assign IP addresses to all LAN devices connected to the 85Mbps Powerline Wireless Access Point. Lease Time: The lease time specifies the amount of time a network user is allowed for their current dynamic IP address. [. . . ] Setup Wizard ­ Set Wireless Encryption Step 4: Setup Completed The Setup wizard is now completed. The new settings will be effective after the 85Mbps Powerline Wireless Access Point restarted. Please click "RESTART" to reboot the 85Mbps Powerline Wireless Access Point. If the user does not want to make any changes, please click "EXIT" to quit without any changes. [. . . ]