User manual TRIMBLE EZ-GUIDE 500 LIGHTBAR GUIDANCE SYSTEM QUICK REFERENCE CARD

[. . . ] Configure the implement Set the implement width, the overlap/skip, and the offsets. Select the pattern See GUIDANCE PATTERNS. Map the Ab line Drive and define the guidance line or headland. Guidance EASY ModE AppliCAtion USE Note - If you select the A+ pattern, you are prompted to enter the heading of the master guidance line. [. . . ] To change to Advanced mode, select Configuration / User mode. · Enter custom Client, Farm, Field, and Event names and record detailed event information for each operation · Add additional AB Lines to the field · Select existing fields to go back for subsequent applications · Shift swaths to correct for position drive or to offset swaths in following years. For more information, see nudge or Shift to Here. · Configure display settings and view options. Select Configuration / System / Display. · Configure implement settings, including implement offsets and draft · Use the AgGPS® AutopilotTM system. For more information, refer to the Autopilot documentation. · View GPS and satellite information and system faults. · Save and load configurations so you can: · use exactly the same settings on multiple lightbars · change settings when you move the lightbar between vehicles for different applications Select Configuration / Data Management / Save/Load Configurations. · Send data to a USB so you can use field data in other lightbars · Delete old data to clear space in internal memory · Load prescriptions for use with the AgGPS EZ-Boom® system when the optional VRA upgrade has been purchased. Nudge Use the and nudge buttons to correct for position drift caused by GPS satellite constellation changes while driving in the field. Nudge is always applied to the guidance line relative to the vehicle heading. The total current nudge distance appears on the tip bar at the bottom of the screen. To configure the nudge options, in Advanced mode, select Configuration / System / Guidance. Shift to Here In Advanced mode, you can use Shift to Here to: · Correct for GPS position drift when returning to the field for guidance, for example after pausing · Offset all swaths for applications in subsequent years You can save the shifted swaths, which nudge does not allow. Summary report A summary report is automatically created for each field. The summary report is a multi-page RTF document that shows field information including coverage, event data, and field information. The summary report is automatically saved to the lightbar memory. To copy this report to the USB drive, select Configuration / Data Management / Manage Fields / Summary Reports / Send Summary reports to USB. The summary report is saved to the /AgGPS/Summaries/ directory on the USB drive. To view the summary report on an office computer: 1. [. . . ] Start the headland, define the guidance line, and then return to the to complete start circle or press the headland. Note - Additional headlands are based on the first headland circuit. Single headland A B A B Multiple headland Identical curve Guidance is based on the initial curve. Set the A point, drive the curve, and then set the B point. Adaptive curve B Guidance is always based on the last pass. Auto U-turn detection = On Each new swath is automatically generated when you turn. [. . . ]