User manual TRIMBLE INFRASTRUCTURE GNSS 4.17 RELEASE NOTES REV A

[. . . ] RELEASE NOTES Trimble® Infrastructure GNSS Series Receivers Introduction New features and changes Updating the firmware Version 4. 17 Revision A August 2010 F Corporate office Trimble Navigation Limited Engineering and Construction Group 5475 Kellenburger Road Dayton, Ohio 45424-1099 USA 800-538-7800 (toll free in USA) +1-937-245-5600 Phone +1-937-233-9004 Fax www. trimble. com Legal notices Copyright and trademarks © 2010, Trimble Navigation Limited. Trimble, and the Globe & Triangle logo are trademarks of Trimble Navigation Limited, registered in the United States and in other countries. Maxwell, NetR5, NetR8, NetR9, and TRIMCOMM are trademarks of Trimble Navigation Limited. [. . . ] Or, mail a request for recycling instructions to: Trimble Europe BV c/o Menlo Worldwide Logistics Meerheide 45 5521 DZ Eersel, NL 2 Infrastructure GNSS Series Receivers Release Notes Introduction These release notes describe new features and changes made to the following Trimble® Infrastructure series receivers. With this release, all these receivers can use firmware version 4. 17: · · · · NetR3 NetR5TM NetR8TM NetR9TM To use firmware version 4. 17, you must have a valid firmware warranty. To load this firmware, the receiver must have a firmware dated September 2009 or later. If necessary, contact your Trimble dealer to purchase a warranty. Before you perform a firmware upgrade, Trimble recommends that you download and backup any files that are on the receiver. New features and changes Data formats · · · Added NMEA LLQ message support. NMEA RMC structure updated to remove spaces. TRIMCOMMTM format updated to: ­ ­ support RTK engine resets upload DC files · · RTCM version 2. x updated for improved handling of SV transmission. GSOF now fully supports 50 Hz output rate. OmniSTAR · New HP library included to improve the position accuracy and improve CPU load. Summary page can now be viewed if the subscription has expired. · Data logging · FTP Push function updated to resolve instability issues after repeated FTP Push attempts with invalid credentials or to a FTP server which is offline. T02 files now correctly contain serial antenna numbers as entered from the web UI. Infrastructure GNSS Series Receivers Release Notes 3 · · Data file sessions updated to allow only durations that have integers from 1 through 1440 minutes. Web interface and front panel · · · · Updated antenna files. PDOP/Number of Satellites graph enhanced to show individual GNSS systems. Results of email with invalid password now show this information instead of connection error. · · · · DDNS support added to the NetR9 receiver. Programmatic Interface: improved performance within Internet Explorer®. The NTRIP Caster CMRx setting no longer defaults to CMRx enabled. [. . . ] In both cases, make sure that the receiver firmware warranty date is September 2009 or later. · If using the WinFlash utility, use the latest version that is available with the version 4. 17 Web package. If using the receiver Web User Interface to load the v4. 17 *. TIMG file, make sure that the receiver is already running firmware version 3. 71 or later before you start this installation. If the receiver firmware version is earlier than 3. 60, load version 3. 60 first, then load version 3. 71 before you load version 4. 17. · Infrastructure GNSS Series Receivers Release Notes 5 [. . . ]