User manual TRIMBLE NOMAD 900G QUICK GUIDE

[. . . ] · Tapandholdthestylusonanitemtoseeapop-upmenuofavailable actions. Then tap the action you want to perform. To enter text, use one of the input panels. To display the current input panel, tap a text box. [. . . ] When set, this password is required every time the unit is turnedon. Followtheon-screeninstructions to set your password, or select Next to skip this step. Plug the charger into power strip or wall outlet. 4 6 Accessing and using the expansion ports UndertheExpansioncaparetheexpansionslots. Dependingonthe configuration of your unit, those with no integrated scanner or camera willhaveoneTypeIICompactFlash(CF)slotandoneSecureDigital(SD) slot. Units with a scanner and/or camera will have one SD slot. There also isaconfigurationtohaveaUSBhostundertheExpansionCap. Toaccess the slots: 1. Use the Philips screwdriver end of the stylus toloosenthequarter-turnscrewsand removetheExpansionCap. Connecting to a computer To transfer files to the handheld, or to install software onto the handheld, you must connect the handheld to a computer. If the computer is running the: · WindowsVista® or Windows 7 operating system, use the WindowsMobileDeviceCenter (WMDC)tomanagethe connection. · Windows® XP or 2000 operating system, use Microsoft® ActiveSync® technology to manage the connection Note ­ You must install the Windows Mobile Device Center or ActiveSync technology onto the computer before you connect the handheld. TodownloadtheWindowsMobileDeviceCenterorActiveSync technology from the Microsoft website, go to www. microsoft. com/windowsmobile. Status indicators Status indicators are displayed in the title bar at the top of the screen. Icon Description Battery level Low battery (20% or less remaining) Battery charging/using external power Speaker is on Speaker is off Connected to ActiveSync or the Windows Mobile Device Center (WMDC) on a computer Connected to a Bluetooth-enabled phone Disconnected from ActiveSync or WMDC Disconnected from a Bluetooth-enabled phone Wireless LAN radio is on A wireless LAN is detected Sending or receiving wireless signals TheWi-Fi and Bluetooth icons on the Today screen show the status of each radio. Tap the icon to access the Wireless Manager and turn on or turn off the radio. change volume check battery level Tap icon to. . . 2. DO NOT forcethecardintotheslot. BothCFandSD cards should be inserted with the front of the card towards the front of the unit. To remove an SD card, gently press on the top of the card to release it from the SD slot. ReattachtheExpansionCapwiththestylus, makingsurethequarter-turnscrewsare seated. configure the connection or access the Wireless Manager Set the date and time zone In the Today screen, tap the clock icon . Tap the Time tab, select the Home option and then select the correct time zone for your location. 8 7 9 Connecting to GPS To collect GPS data, install GPS field software onto the handheld and, if required, configure the software to connect to the integrated GPS receiver. Software TerraSyncTM software Description Troubleshooting If the screen on the handheld is blank, do one of the following: · TapthescreenwiththestylusorpressoneoftheNavigationkeysto turn on the backlight. · PressthePowerbuttontoturnonthehandheld. [. . . ] Peel the backing and place the screen protector over the touchscreen. Slide the edges of the screen protector under the bezel to ensure best fit. Smooth with the enclosed installation card if needed to remove air bubbles. © 2010. This product is protected by US and international copyright, trademark, and patent law as described in "Legal Notices" in the Nomad 900 Series Handheld Computer Getting Started Guide. [. . . ]