User manual TRIMBLE SURVEY PRO 4.10.0 RELEASE NOTES REV A

[. . . ] Roads can be loaded from a LandXML file and will include cross sections and alignments. The road can then be staked using the road staking tools just like a road loaded from an RD5 file except the road definition cannot be modified on the data collector. Added a new feature that allows real-time coordinate and measurement data to be output via Bluetooth or a COM port on the controller for use outside of Survey Pro. The data is in a simple XML format and can contain just coordinate information for new points, measurement data for stored points, or both. [. . . ] More options are automated or selected once and then remembered for all new jobs. Added Bluetooth support for the FOCUS 30. Added a setting to allow averaging of measurements on Nivo C and FOCUS 8. Added a setting to control the laser plummet intensity on Nivo C and FOCUS 8. Added a descriptor field on the NEZ tab of the Remote Control screen for foresight measurements. The Survey Pro All CAPS option will be ignored when entering passwords. Increased the Prism Constant allowable range to 1m. Added a fly-out button to switch back to countdown mode while staking using the Quick Stake screen. Added new information on the Face 2 Screens of Nivo C, FOCUS 8 and FOCUS 30 for supporting repetition shots. Added a Static IP base modem option to better support IP to IP modem GNSS surveying. General Improvements · · · Improved the behavior of the Lumi-Guide for Nivo and FOCUS 8. Calibrated the Survey Pro out of level sensitivity so the level bubble screen will not appear when turning the instrument during repetition shots with the On-board software on Nivo C and FOCUS 8. Chinese and Russian languages on the Nivo C and FOCUS 8 no longer draw incorrect characters on the Face 2 screen. F 3 · · · · · · · · · · · · · · · · Improved the overall stability of the EPOCH 25 instrument driver. Stake DTM feature no longer has a longer than expected delay before recording data. Survey Pro will now get the initial base position when doing VRS with CMRx corrections. Survey Pro no longer plays the error sound when entering the position display screen. Network Fixed and Fixed GNSS displays are now differentiated for EPOCH 35. Removed the CR5 file as an open from the File Open menu to preclude accidentally overwriting an existing job. CR5 files can still be imported from the Import screen. [. . . ] Survey Pro 4. 10 enforces the requirement for a valid warranty prior to updates. The Survey Pro 4. 10 installation program will use an Internet connection to verify the serial number of the data collector for warranty coverage. If the unit is not covered, you can continue the installation, but the software will only work in demo mode on the data collector until a warranty is purchased. You can also choose to discontinue the installation and keep the fully licensed version that is currently installed on the unit. [. . . ]