User manual TRIMBLE TRIMMARK3 RADIO MODEM 1.28 RELEASE NOTES REV A

[. . . ] If you have purchased the Product from an authorized Trimble distributor rather than from Trimble directly, Trimble may, at its option, forward the software Fix Update or Minor Update to the Trimble distributor for final distribution to you. Major Upgrades, new products, or substantially new software releases, as identified by Trimble are expressly excluded from this update process and limited warranty. Receipt of software updates shall not serve to extend the limited warranty period. For purposes of this warranty the following definitions shall apply: (1) "Fix Update" means an error correction or other update created to fix a previous software version that does not substantially conform to its published specifications; (2) "Minor Update" occurs when enhancements are made to current features in a software program; and (3) "Major Upgrade" occurs when significant new features are added to software, or when a new product containing new features replaces the further development of a current product line. [. . . ] ­ Increase the separation between the equipment and the receiver. ­ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ­ Consult the dealer or an experienced radio/TV technician for help. Changes and modifications not expressly approved by the manufacturer or registrant of this equipment can void your authority to operate this equipment under Federal Communications Commission rules. Canada This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of the Canadian Department of Communications. Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de Classe B prescrites dans le règlement sur le brouillage radioélectrique édicté par le Ministère des Communications du Canada. Australia and New Zealand This product conforms with the regulatory requirements of the Australian Communications Authority (ACA) EMC framework, thus satisfying the requirements for C-Tick Marking and sale within Australia and New Zealand. Taiwan ­ Battery Recycling Requirements The product contains a removable Lithium-ion battery. Taiwanese regulations require that waste batteries are recycled. Notice to Our European Union Customers For product recycling instructions and more information, please go to www. trimble. com/ev. shtml. Recycling in Europe: To recycle Trimble WEEE (Waste Electrical and Electronic Equipment, products that run on electrical power. ), Call +31 497 53 24 30, and ask for the "WEEE Associate". Or, mail a request for recycling instructions to: Trimble Europe BV c/o Menlo Worldwide Logistics Meerheide 45 5521 DZ Eersel, NL 4 TRIMMARK 3 Radio Modem Release Notes 1. 1 Introduction These Release Notes contain information about the firmware version 1. 28 that is not included in the TRIMMARK 3 Radio Modem User Guide. Your Trimble® TRIMMARKTM 3 radio modem is supplied with a CD containing the current version of firmware, the TRIMMARK 3 Radio Modem User Guide in PDF format, and the WinFlash utility. 1. 2 Changes The following change was made from the firmware version 1. 26: · TRIMMARK 3 firmware version 1. 28 supports broadcasting the additional GLONASS records in the CMR+TM message. 1. 3 Existing Features SiteNet wireless mode The SiteNetTM wireless mode is the underlying transport used for the new semi-transparent mode. It also supports the standard base/rover/repeater operation. The SiteNet mode is not compatible with any earlier TRIMTALKTM 450S or TRIMMARK 3 modes. The TRIMMARK 3 radio modem supports over-air data rates of 19, 200 and 9600 bps in a 25 kHz channel, and 9600 bps in a 12. 5 kHz channel. The SiteNet 450 mode supports only 9600 bps in a 25 kHz channel. The SiteNet 9600 mode in a 25 kHz channel is compatible with the SiteNet 450 radio version 1. 20. The SiteNet 8000 mode is enabled only on a SiteNet 450 radio that operates with a channel spacing of 12. 5 kHz. The mode is not compatible with any TRIMMARK 3 mode. 13. 1 TRIMMARK 3 Radio Modem Release Notes 5 13. 2 TRIMTALK 450S wireless mode Note ­ You can use this mode if you are experiencing difficulties with the normal Base mode. However, Trimble does not recommend this mode for CMRTM format distribution. TRIMTALK 450S modes can now run in bi-directional semi-transparent mode. You can use both the TRIMMARK 3 and the SiteNet 450 radio in a network. If two or more radio modems are configured for semi-transparent source with the Netmode TRIMTALK 450S radio, then the units can be used to broadcast any type of message across the network. [. . . ] TRIMMARK 3 radio modems configured as Semi-Transparent Slaves with CMRs will send or receive only semi-transparent data. A TRIMMARK 3 radio modem configured as a Semi-Transparent Master with CMR will broadcast only CMR format. If you want a TRIMMARK 3 radio modem to receive CMR format on a semi-transparent network, configure the unit as a rover. TRIMMARK 3 Radio Modem Release Notes 11 Issues · Semi-transparent mode does not detect or rebroadcast lost data. If lost data detection and rebroadcast is required, Trimble recommends that you set the controller at each node in the link to operate at a higher level protocol. [. . . ]