User manual TRISTAR CM-2273

[. . . ] Pressing the pump control button to the lower position, the water will flow out. ? After this process you can start brewing. ? Note: there may be some noise when pumping the water the first time, this is normal, the appliance is releasing the air in the appliance. After about 20 seconds the noise will disappear. [. . . ] ? Press down the coffee/steam button to the lower position which is the steam position, wait until the heating indicator illuminates. ? Note: make sure the steam control knob is turned to the off position. ? If the heating indicator illuminates press the coffee steam button to the higher position. ? Then press the pump control button and wait until the water is flowing out. ? When the water is flowing out press the coffee/steam button to the lower (steam) position and stop pumping water, wait until the heating indicator illuminates. Of milk for each cappuccino to be prepared, we recommend to use only whole milk at refrigerator temperature (not hot). In choosing the size of the jug we recommend to use a jug which volume is about 450ml. Bear in mind that the milk increases in volume by 2 times, make sure the cup is high enough. ? Insert the steam nozzle about two centimeter into the milk, then turn the steam control knob slowly anti-clockwise, now the steam will come out, move the jug round and up and down while frothing. ? Note: never turn the steam control knob rapidly. ? When the required purpose is reached, you can turn the steam control knob to the off position and turn off the coffee maker. ? Note: clean the steam nozzle immediately after use, please be aware you do not burn yourself. ? Note: we recommend to allow the device to cool down at least for 5 minutes before making coffee again. Otherwise burnt odor may occurred in your espresso coffee. CLEANING AND MAINTENANCE ? Unplug the device and let it cool down completely before cleaning. ? Clean the housing of the device with a damped cloth. Clean the water tank, drip tray and removable shelf regularly under warm running water. ? Detach the filter holder by turning it clockwise, then pour out the coffee residue and clean it with a cleaner, make sure you rinse the parts with clear water after cleaning. ? Dry all the parts after cleaning thoroughly. Cleaning mineral deposits ? To make sure your coffee maker operating efficiently, you should remove the mineral deposits left every 2-3 months. ? Fill the tank with water and descaler (water/descaler ratio: 4:1). ? Simply follow the steps for making espresso and frothing milk and rinse the device with the water/ descaler mixture. [. . . ] ? The appliance must be placed on a stable, level surface. ? The user must not leave the device unattended while it is connected to the supply. ? This appliance is only to be used for household purposes and only for the purpose it is made for. ? To protect yourself against an electric shock, do not immerse the cord, plug or appliance in the water or any other liquid. [. . . ]