User manual TRONIC KH 3157 AUTOMATIC CAR BATTERY CHARGING STATION T4X

[. . . ] Do not put a defective appliance or parts into operation. The TRONIC T4X is a primarily mains-connected (working with measuring and control functions) charging station with pulse trickle charge function, suitable for charging and trickle charging 12 V lead accumulators (batteries) with electrolyte solution or gel. < 50 dB (A) (tested from a distance of 50 cm) * = Return current is the current used by the charging station battery, when no mains current is connected. Before charging, study instruction sheet. [. . . ] After completing the charging and floating charge operation on a battery permanently installed in the vehicle, first disconnect the cable of the negative (minus) pole (black) of the charger from the negative (minus) pole of the battery. In case of malfunction or damage, immediately disconnect the charging station from the mains! have the charging station repaired by authorised and trained specialists only!Please contact the service department for your country!Before connecting the charging station, read the information on battery maintenance in the operating instructions of the battery!Before connecting the charging station to a battery permanently installed in a vehicle, read the information on electrical safety and maintenance in the operating instuctions of the vehicle! do not subject the battery to mechanical loads!When the charging station is not in use, disconnect it from the power supply!This appliance has been designed for charging a variety of SLA batteries (sealed lead acid batteries), as mainly used in cars, motorbikes and several other vehicles. A special design of the appliance (also named , , three-phase-charging strategy") enables the recharging of the batttery to almost 100 % of its original capacity. Furthermore, a long-term connection of the battery to the charging station can take place to keep the battery in optimal condition when not in use, without it being damaged in the process. Then disconect the plus pole connecting cable (red) of the vehicle from the plus pole of the battery. Connect the power cord 10 of the battery charging station to the socket oulet with earthing contact of the power supply. Disconnect the appliance from the power supply. Only install, maintain and service the appliance when it is disconnected form the mains!Working safely j j When putting the appliance into operation, select a suitable place to do so. Take your time when carefully preparing to put the appliance into operation. Put all compoments and any additionally required tools or materials well arranged and within easy reach. Always be alert and pay attention to what you are doing. Be sensible when working and do not operate the charging station if you lack the ability to concentrate or do not feel well. Before starting the charging or discharging procedure on a permanently installed battery in a vehicle, first disconnect the minus pole con- For charging various batteries at different ambient temperatures you can choose between three different charging modes. select the most efficient and suitable charging mode for charging the battery. [. . . ] If you do not activate any settings, the system will remain in STANDBY mode. With the inverse connection of the output clamps the LED display , , in5 lights up additionally. In accordance with European Directive 2002 / 96 / EC on used electrical and electronic appliances and its implementation in national law, used power tools must be collected separately and recycled in an ecologically compatible manner. please return the tool via the available collection facilities. [. . . ]