User manual TRONIC KH 971 RAPID BATTERY CHARGER

[. . . ] Read the operating instructions carefully before using the appliance for the first time and preserve this booklet for later reference. Domestic use only, it is not intended for commercial use. The supplied power adapter is intended for exclusive use with the Rapid Battery Charger. This device has not been designed for use by people (including children) with restricted physical, sensory or intellectual abilities or lack of experience and/or knowledge, unless they are supervised by a responsible person (for their own safety) or have received instructions on how to use the device. [. . . ] You should remove all batteries from the Rapid Battery Charger if you do not intend to use it for an extended period. You can thus protect the Rapid Battery Charger from damage caused by leaking battery acids. There is a risk of explosion and injury!If the appliance is not going to be used for long periods, remove the batteries. Clean the battery compartment and contacts with a dry cloth. Remove all components ­ Rapid Battery Charger, power adapter ´, vehicle-adapter ² and batteries ­ from the packaging. ⷠBefore taking the Rapid Battery Charger into use, check that all items are complete/available and free of visible damage. ⷠPlace the Universal Battery Charger on a straight, level, scratch and slip resistant surface. ⷠInsert the low-tension plug of the power adapter ´ into the power adapter connection ³ on the Rapid Battery Charger. ⷠCompare the technical details with those of your power supplier. If they match, insert the power plug ´ into a mains power socket The Rapid Battery Charger is now ready for use. With the supplied vehicle-adapter ² you can also connect the Rapid Battery Charger to . Into the 12-V on-board power supply socket of a vehicle. Thereby, you simply use the vehicle-adapter ² instead of the power adapter ´. Use the Rapid Battery Charger exclusively with the supplied vehicle-adapter F. The use of other vehicle-adapters could irreparably damage the Rapid Battery Charger!Should a cigar lighter be inserted into the cigar-lighter socket: - Remove the cigar lighter. Remains of ash) is removed from the inside of the cigar lighter socket!Otherwise, it could lead to a malfunction in the operation of the Rapid Battery Charger with the vehicle-adapter ² ! ⷠInsert the low-tension plug of the vehicle-adapter ² into the power adapter connection ³ of the Rapid Battery Charger. Under strong sunlight, and with a correspondingly heated vehicle interior, the Rapid Battery Charger could over-heat and be irreparably damaged. It is possible that the cigar-lighter only functions with a switched-on vehicle ignition. [. . . ] ⷠThe malfunction cannot be corrected as described above, · Or, when operating the Rapid Battery Charger, other malfunctions occur. Risk of injury from electric shock: ⷠNever immerse the device's parts into water or other liquids!Clean the housing of the Rapid Battery Charger and the power adapter ´ exclusively with a lightly moistened cloth. For stubborn soiling use a few drops of mild detergent on the lightly moistened cloth. [. . . ]