User manual TRONIC T4X

[. . . ] Children should be supervised to ensure that they do not play with the device. In order to avoid the device being switched on unintentionally, remove the adapter from the mains socket after each use and before cleaning. The device's safety concept can only work if the device is in perfect condition. The mains adapter must always be freely accessible so that the device can be separated from the power supply quickly in an emergency. [. . . ] This is supplied with the Universal Battery Charger. Devices connected to mains power can be damaged during a thunder storm. If there is a thunder storm, always remove the mains plug from the socket. Opening the housings of the Rapid Battery Charger, power adapter or vehicle-adapter · attempted repairs made by non-qualified personnel · Improper use of the Rapid Battery Charger, power adapter and/or the vehicle-adapter, no liability or warranty will be accepted! Leakage of battery acids can occur, especially with old batteries. You should remove all batteries from the Rapid Battery Charger if you do not intend to use it for an extended period. You can thus protect the Rapid Battery Charger from damage caused by leaking battery acids. There is a risk of explosion and injury!If the appliance is not going to be used for long periods, remove the batteries. Clean the battery compartment and contacts with a dry cloth. Remove all components ­ Rapid Battery Charger, power adapter y, vehicle-adapter u and batteries ­ from the packaging. This appliance is equipped with an individual shaft monitor, which allows it to charge 1 to 4 batteries of differing sizes (AA or AAA), capacity or charge condition. ni-MH and Ni-Cd batteries must not be loaded simultaneously. Ensure that the batteries are inserted into the charging slots in accordance with their polarities. Otherwise, the batteries will not be charged. The control lamp w does not glow: - The batteries have not been inserted correctly into the charging slots t. The batteries will become hot during charging. Unplug the AC adapter y from the mains power socket or the car adapter u from the cigar lighter socket and allow the batteries to cool down. Afterwards you can remove the charged batteries from the Rapid Battery Charger. Depending on the type, age and remaining charge in the batteries, the charging process can take various lengths of time. The average charging time can be taken from the following table. Take note however that the times given are only guiding values. [. . . ] Risk of injury from electric shock: Never immerse the device's parts into water or other liquids!Never use petroleum, solvents or aggressive cleaning agents, they may damage the housing surfaces! Clean the housing of the Rapid Battery Charger and the power adapter exclusively with a lightly moistened cloth. Never clean the insides of the charging slots t with moist cloths. [. . . ]