User manual TRUSTMASTER FERRARI GT EXPERIENCE 3-IN-1

[. . . ] Installation on PC The CD-ROM included with this product allows you to install the "Vibration Feedback" drivers. Once the installation is complete, click Finish and restart your computer. Once your computer has restarted, connect the USB connector (13) to one of your computer's USB ports. Follow the on-screen instructions to complete the installation. [. . . ] You will then have to exit the game and select "combined" (2 axes) mode instead. Selecting axes via "Software" (This setting will be saved even after you restart or disconnect your wheel) On page 1 of the "Control Panel": Select the mode you wish to use, then click OK. Selecting axes via "Hardware" (This setting will not be saved: It must be repeated each time you restart or disconnect) (Allows you to select your mode directly in your game's "Controls" options) Simultaneously press and release: the 2 pedals (14) + the "Home" button (6) My wheel doesn't function correctly or appears to be improperly calibrated: - Switch off your computer or your console, completely disconnect your wheel including all cables, then reconnect the wheel and restart your game. Com - Never move the wheel or pedals when connecting your wheel in order to avoid any calibration problems. My pedal set does not work correctly: - Reconfigure your wheel in your game's controller options section. - If the problem persists on PC , exit the game and switch the pedals to "combined" (2 axes) mode. You can then return to your game to reconfigure the wheel with the new axes. I can't configure my wheel: - On PS2 and PS3: In your game's "Options / Controller / Gamepads" menu: select the most appropriate configuration. - On PC: In your game's "Options / Controller / Wheels" menu: select the most appropriate configuration. - Please refer to your game's user manual or online help for more information. - You can also use your wheel's "programming" function to resolve this type of problem. On PC or PS3, my wheel does not work correctly: - Exit your game, disconnect your wheel, verify that the "PC/PS3 " USB selector (7) is in the proper position, then reconnect everything and try again. Then return to your game to reconfigure the wheel with the new axes. On PC, the vibrations are continuous: - Decrease the intensity of force effects in your game's controller options section or adjust the forces in the wheel's control panel. My wheel's steering is not responsive enough: - Switch your wheel to high sensitivity mode. If you encounter a problem with your product, please go to http://ts. From there you will be able to access various utilities (Frequently Asked Questions (FAQ), the latest versions of drivers and software) that may help to resolve your problem. If the problem persists, you can contact the Thrustmaster products technical support service ("Technical Support"): By email: In order to take advantage of technical support by email, you must first register online. The information you provide will help the agents to resolve your problem more quickly. click Registration on the left-hand side of the Technical Support page and follow the on-screen instructions. [. . . ] All other trademarks and brand names are hereby acknowledged and are property of their respective owners. Contents, designs and specifications are subject to change without notice and may vary from one country to another. ENVIRONMENTAL PROTECTION RECOMMENDATION At the end of its working life, this product should not be disposed of with standard household waste, but rather dropped off at a collection point for the disposal of Waste Electrical and Electronic Equipment (WEEE) for recycling. This is confirmed by the symbol found on the product, user manual or packaging. [. . . ]